Key Hook Rail with Shelf

The Key Hook Rail with Shelf is a wall key holder for the hallway that you print yourself. Five hooks angle upward so key rings do not slide off. Above them sits a shelf with a raised lip for your phone, wallet or sunglasses.

You choose how to mount it. One version has two countersunk holes for 4 mm screws, 90 mm apart. The other has no holes and goes up with adhesive strips, handy if you cannot or do not want to drill.

• Size: 170 × 136 × 72 mm
• 5 hooks, 34 mm long, 30 mm apart, angled 38 degrees upward
• Shelf: 164 mm wide, 65 mm deep inside, 8 mm lip
• Screw version (4 mm, 8 mm countersunk head) and adhesive-strip version
• No supports, digitally checked for printability

Print tips: print the rail on its back, as supplied. The hooks and shelf are then loaded across the layers, which is the strong direction. With 4 walls and 25% infill it is plenty strong for keys and a phone. 0.2 mm layers; PLA or PETG.

Adhesive version: use 2 to 4 strong mounting strips on a smooth, clean wall. At 170 mm wide, the rail fits a 180 mm print bed. You get two STL files and one 3MF.