Support-free
3MF + STL
Home & Living4 parts
Vase Set with Propagation Station
Three matching vase-mode vases (twisted hexagon, ribs and waves) plus a propagation station with three pointed arches for 25 mm glass test tubes, to root your cuttings. Four parts, support-free.
- Largest part
- 86.8 × 86.7 × 160 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€4.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Vase Set with Propagation Station is three matching vases to print in vase mode, plus a propagation station to root your cuttings.
- Twisted hexagon: 86.8 × 86.7 × 160 mm
- Ribs: 88.6 × 88.6 × 130 mm
- Waves: 87.1 × 84.9 × 100 mm
- Propagation station: 150 × 50 × 120 mm, with three pointed arches for glass test tubes
The vases are solid files for spiral vase (vase mode): the printer lays one continuous wall with no seam. It is fast and gives a smooth outside. The station holds three glass test tubes of 25 mm diameter and 150 mm long with a round bottom (not included). The glass holds the water, so the station itself does not need to be watertight.
All four parts print without supports and are digitally checked for printability.
Print tips: enable spiral vase and use 3 to 5 bottom layers. With a 0.4 mm line width a vase is decorative, for dried flowers. If you want to put water in it, print in PETG with a 0.6 to 0.8 mm line width and check that it holds water first. Print the station upright with 3 walls and 15% infill.
You get four STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
vase-twist.stl
- Dimensions (w × d × h)
- 86.8 × 86.7 × 160 mm
- File
- 671 kB
-
vase-rib.stl
- Dimensions (w × d × h)
- 88.6 × 88.6 × 130 mm
- File
- 6.2 MB
-
vase-wave.stl
- Dimensions (w × d × h)
- 87.1 × 84.9 × 100 mm
- File
- 6.2 MB
-
station.stl
- Dimensions (w × d × h)
- 150 × 50 × 120 mm
- File
- 435 kB
You get all files together in one ZIP.
- station.stl435 kB
- stem-vase-set.3mf4.3 MB
- vase-rib.stl6.2 MB
- vase-twist.stl671 kB
- vase-wave.stl6.2 MB
800 layers of 0.2 mm (vase twist, 160 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
The three vases are solid files for spiral vase (vase mode): enable spiral vase, 3 to 5 bottom layers. With a 0.4 mm line width a vase is decorative (dried flowers); for water use PETG with a 0.6 to 0.8 mm line width and check that it holds water first. Print the station upright with 3 walls and 15% infill. The station is made for glass test tubes of 25 mm diameter and 150 mm long with a round bottom (not included); the glass holds the water.
Frequently asked questions
What is vase mode?
Vase mode (spiral vase) is a slicer setting where the printer lays down one continuous spiral wall, with no seam and no infill. It is fast and gives a smooth outside.
Can I put water in the vases?
With a 0.4 mm line width they are meant for dried flowers. For water, print in PETG with a 0.6 to 0.8 mm line width and check that the vase holds water first. See also our guide to watertight prints.
Which test tubes fit the station?
Glass test tubes of 25 mm diameter and 150 mm long, with a round bottom. They are not included; buy them separately.
How do I root cuttings?
Put a cutting with a node under water in a tube of tap water, in a bright spot out of harsh sun. Refresh the water now and then; many houseplants show roots after a few weeks.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
