Bag Clip Set

The Bag Clip Set lets you print your own clips for crisp bags, coffee bags and freezer bags. Each clip is a single piece: the ring spring and snap latch print in place, so there are no loose parts or metal springs.

The wave profile in the jaws presses the bag shut along its full length. The set comes in three clamp lengths, so you have the right size for every bag.

• 60 mm clamp: clip 79.6 × 21.3 × 10 mm
• 90 mm clamp: clip 109.6 × 25.4 × 10 mm
• 120 mm clamp: clip 139.6 × 29.6 × 10 mm
• Ring spring with a 16 mm outer diameter
• Prints flat, no supports, digitally checked for printability

How it works: the clip comes off the bed open. Fold the bag so it fits within the clamp length and press the clip shut until the hook clicks. To open it, push the thumb tab outward.

Print tips: 0.2 mm layers, 3 walls, 30% infill. PLA works, but PETG springs back best and stays flexible longer. The clips are small (6 to 11 cm³), so they print quickly and make a good first print on a new printer.

You get three STL files and one 3MF with all three sizes.