Nederlands English
Cart 0
Drawer knobs (M4)

Support-free

3MF + STL

  • Show image 1: Drawer knobs (M4)

Home & Living2 parts

Drawer knobs (M4)

30 mm drawer knobs in two shapes, round and hexagonal, for cabinets, dressers and nightstands. A standard M4 nut slides into a slot in the base and the bolt comes from inside the drawer: solidly fixed without glue.

Largest part
30 × 30 × 27 mm
Layer
0.2 mm
Material
PLA or PETG

€1.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Drawer knobs (M4) give a cabinet, dresser or nightstand a quick new look. There are two shapes: round and hexagonal. A standard M4 nut slides into a slot in the base and the bolt comes from inside the drawer, so the knob is held firmly without glue.

  • 30 mm head, 20 mm base, 27 mm tall (hex 24 mm)
  • M4 nut (7 mm across flats) in a 7.3 × 3.6 mm slot
  • M4 bolt of 25 to 30 mm, for 16 to 19 mm drawer fronts
  • Prints without supports, digitally checked for printability

Print tips: print standing on the base, as supplied. 0.2 mm layers, 4 walls, 40% infill, PLA or PETG. Slide the nut into the slot and tighten the knob from inside the drawer. Do not overtighten.

Print as many knobs as you have drawers. You get two STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 30 mm 27 mm

    drawer-knob-round.stl

    Dimensions (w × d × h)
    30 × 30 × 27 mm
    File
    229 kB
    Supports: None
  • 30 mm 24 mm

    drawer-knob-hex.stl

    Dimensions (w × d × h)
    30 × 26 × 24 mm
    File
    33 kB
    Supports: None

You get all files together in one ZIP.

  • drawer-knob-hex.stl33 kB
  • drawer-knob-round.stl229 kB
  • drawer-knob-set.3mf71 kB

135 layers of 0.2 mm (drawer knob round, 27 mm tall)

Layer height
0.2 mm
Walls
4
Infill
40%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print standing on the base as supplied. Slide the M4 nut into the slot on the side and fasten the knob with a 25 to 30 mm M4 bolt from inside the drawer. Do not overtighten. Print as many knobs as you have drawers.

Frequently asked questions

Which bolt do I need?

An M4 bolt of 25 to 30 mm for a 16 to 19 mm drawer front, plus a standard M4 nut.

Do I need to glue the knob?

No. The nut sits in a slot in the base and the bolt pulls the knob tight against the drawer front.

Can I replace existing knobs?

Yes, if the front has a hole for an M4 bolt or you can drill one. Check that the old hole is not too large.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal