Support-free
3MF + STL
Home & Living2 parts
Tube Squeezer
Get the last bit out of your tube of toothpaste, hand cream or paint. Slide the end through the slot and roll or push the squeezer towards the cap. Two sizes: for tubes up to 46 mm and up to 62 mm wide. With thumb dimples for grip. Support-free.
- Largest part
- 76 × 24 × 7 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Tube Squeezer gets the last bit out of your tube of toothpaste, hand cream or paint. Slide the flat end of the tube through the slot and roll or push the squeezer towards the cap. Thumb dimples give you grip.
- Small: 60 × 24 × 7 mm, for tubes up to 46 mm wide
- Large: 76 × 24 × 7 mm, for tubes up to 62 mm wide
- 3 mm slot
- Prints without supports, digitally checked for printability
Print tips: print flat, as supplied. 0.2 mm layers, 3 walls and 30% infill or more, so the squeezer is sturdy. PLA or PETG. Measure your tube's width when flat and pick the size that is just wider.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
squeezer-small.stl
- Dimensions (w × d × h)
- 60 × 24 × 7 mm
- File
- 95 kB
-
squeezer-large.stl
- Dimensions (w × d × h)
- 76 × 24 × 7 mm
- File
- 95 kB
You get all files together in one ZIP.
- squeezer-large.stl95 kB
- squeezer-small.stl95 kB
- toothpaste-squeezer.3mf48 kB
35 layers of 0.2 mm (squeezer small, 7 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 30%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print flat on the bed, as oriented in the files. Use 30% infill or more so the squeezer is sturdy. Measure your tube's width when flat and pick the size that is just wider.
Frequently asked questions
Which size do I need?
Measure the tube when flat. Up to 46 mm wide fits the small squeezer, up to 62 mm the large one.
Does it work for other tubes?
Yes, for any flat tube that fits through the 3 mm slot, such as hand cream, ointment or paint.
How sturdy is it?
Print it with 30% infill or more, so it does not bend when you slide it along the tube.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
