Support-free
3MF + STL
Home & Living1 part
Tissue Cube Cover
Cover with honeycomb walls for a cube-shaped tissue box up to 115 x 115 x 132 mm. Place it over the box; the tissues come out of the hexagonal opening on top. The bottom is open, so swapping in a new box takes seconds. Prints without supports.
- Size
- 121.8 × 121.8 × 138.4 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Tissue Cube Cover turns a printed tissue box into something you are happy to leave out. Place the cover over the box; the tissues come out of the hexagonal opening on top. The walls have a honeycomb pattern of open cells. Because the bottom is open, swapping an empty box takes seconds.
- Outside 122 × 122 × 138 mm
- Inside 117 × 117 × 136 mm, for cube boxes up to about 115 × 115 × 132 mm
- 56 mm hexagonal opening, 12 mm cells in the walls
- Inner size can be changed in the model
- Prints without supports, digitally checked for printability
Print tips: print the cover upside down, with the top on the bed, as supplied. The cells have a short bridge at the top that prints cleanly with normal settings and good cooling. 0.2 mm layers, 2 walls and 15% infill. Measure your tissue box before you print.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
tissue-cube-cover-hex.3mf
- Dimensions (w × d × h)
- 121.8 × 121.8 × 138.4 mm
- File
- 52 kB
You get all files together in one ZIP.
- tissue-cube-cover-hex.3mf52 kB
- tissue-cube-cover-hex.stl279 kB
692 layers of 0.2 mm (tissue cube cover hex, 138.4 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 2
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the cover upside down, with the top on the bed, as supplied. The cells in the walls have a short bridge at the top; this works with normal settings and good part cooling. Measure your box first: it must be smaller than 116 x 116 x 135 mm. The inner size can be changed in the model.
Frequently asked questions
Will my tissue box fit?
The inside is 117 × 117 × 136 mm. Cube-shaped tissue boxes are usually 110 to 115 mm wide and 125 to 132 mm tall and fit. This cover is not meant for long flat boxes.
How do I replace an empty box?
Lift the cover, take out the empty box and place the cover over a new one. The bottom is open, so nothing needs to come apart.
Why does it print upside down?
That way the top with the opening lies flat on the bed and the walls grow straight up, so no supports are needed.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
