Support-free
3MF + STL
Home & Living1 part
Spare Roll Holder
Open hexagonal wall cell for one spare toilet roll up to 120 mm across. Print 2 or 3 and hang them side by side or stacked like a honeycomb. The roll sticks out a little so it is easy to grab. Each cell has two countersunk holes for 4 mm screws (not included). Prints without supports.
- Size
- 151 × 130.8 × 89 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Spare Roll Holder is an open hexagonal cell for the wall. It holds one spare toilet roll; print 2 or 3 and hang them side by side or stacked as a honeycomb. The roll lies with its opening facing you and sticks out 14 mm, so it is easy to grab. A low lip at the front keeps it in place.
- 151 × 131 mm cell, 89 mm deep from the wall
- For rolls up to 120 mm across and about 100 mm wide
- Hexagonal windows in the side walls and back
- Two countersunk holes for 4 mm screws, 68 mm apart (screws and wall plugs not included)
- Prints without supports, digitally checked for printability
Print tips: print the cell on its back, as supplied. The windows have a short bridge at the top that prints fine with normal settings. 0.2 mm layers, 3 walls and 15% infill. In the bathroom PETG is the best choice.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
spare-roll-holder.3mf
- Dimensions (w × d × h)
- 151 × 130.8 × 89 mm
- File
- 42 kB
You get all files together in one ZIP.
- spare-roll-holder.3mf42 kB
- spare-roll-holder.stl204 kB
445 layers of 0.2 mm (spare roll holder, 89 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the cell 2 or 3 times, on its back as supplied. The windows in the side walls print with a short bridge at the top, which works with normal settings. Mount each cell with two 4 mm countersunk screws and wall plugs (not included). The screw holes sit near the top so the roll hangs securely. In the bathroom PETG is the best choice.
Frequently asked questions
Will my toilet rolls fit?
The cell is made for rolls up to 120 mm across. Standard toilet rolls are 95 to 110 mm wide and stick out a little at the front, so they are easy to grab.
How do I mount the holder?
Each cell has two countersunk holes for 4 mm screws, 68 mm apart. Use wall plugs that suit your wall. Screws and plugs are not included.
How many cells should I print?
One cell per spare roll. Two or three cells side by side or stacked form a honeycomb; the flat sides line up exactly.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
