Support-free
3MF + STL
Home & Living1 part
Kids smartwatch charging stand, fits One2Track
Stand that holds the kids smartwatch in place while it charges, with a pass-through for the charging cable. Fits One2Track watches. Prints without supports.
- Size
- 96.1 × 49.1 × 40 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€3.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Kids smartwatch charging stand gives your child's watch a fixed spot while it charges. The watch sits securely in the stand and the charging cable runs neatly through the opening in the upright wall. No more loose watches and cables on the dresser or nightstand.
- Fits One2Track kids smartwatches
- Size 96 × 49 × 40 mm, fits any common print bed
- Cable openings in the upright wall
- Prints without supports, digitally checked for printability
Print tips: print in the orientation of the file, long side flat on the bed. The tops of the openings are short bridges any printer handles without supports. PLA is fine; PETG is a little tougher.
One2Track is a trademark of its owner. This stand is an original LayerKit design and not an official One2Track product.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
charging-stand.stl
- Dimensions (w × d × h)
- 96.1 × 49.1 × 40 mm
- File
- 1.7 MB
You get all files together in one ZIP.
- charging-stand.stl1.7 MB
- smartwatch-charging-stand.3mf536 kB
200 layers of 0.2 mm (charging stand, 40 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print in the orientation of the file, long side flat on the bed. The tops of the two openings in the upright wall are short bridges; no supports needed.
Frequently asked questions
Does it work with every One2Track watch?
It is designed for One2Track kids smartwatches with the standard charging cable. If in doubt, compare the dimensions on this page with your watch.
Do I need supports?
No. Only the tops of the two openings are short bridges, which print without supports.
Is this an official One2Track product?
No. It is an original LayerKit design that fits One2Track watches.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
