Nederlands English
Cart 0
Shower Curtain Rings (12)

Support-free

3MF + STL

  • Show image 1: Shower Curtain Rings (12)

Home & Living1 part

Shower Curtain Rings (12)

Hexagonal snap rings for a shower curtain, for rods up to 25 mm. Thread the ring through the hole in the curtain and snap it shut; with a bit of force it opens again. Prints flat without supports. Print 12 for a standard shower curtain.

Size
40.9 × 46.1 × 5 mm
Layer
0.2 mm
Material
PETG

€1.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Shower Curtain Rings are hexagonal rings with a snap latch. An arrow tip on one end clicks between two springy arms on the other end; with a bit of force the latch opens again. The ring hangs from its top corner on the rod and the curtain settles in the bottom corner, so everything hangs in a neat line.

  • For shower rods up to 25 mm across
  • Ring 41 × 46 mm, band 4.6 mm wide and 5 mm thick
  • Print 12 for a standard shower curtain
  • Prints flat without supports, digitally checked for printability

Print tips: print the ring 12 times, flat as supplied; they fit on the bed together. Use PETG: it handles moisture and warmth in the bathroom and the arms spring better than with PLA. 0.2 mm layers and 100% infill. The ring comes off the bed closed; twist the latch open the first time.

You get one STL file and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 40.9 mm 5 mm

    shower-curtain-ring.stl

    Dimensions (w × d × h)
    40.9 × 46.1 × 5 mm
    File
    22 kB
    Supports: None

You get all files together in one ZIP.

  • shower-curtain-ring.stl22 kB
  • shower-curtain-rings.3mf6 kB

25 layers of 0.2 mm (shower curtain ring, 5 mm tall)

Layer height
0.2 mm
Walls
3
Infill
100%
Supports
Not needed
Material
PETG

Designer's tip

Print the ring 12 times, flat as supplied; they fit on the bed together. Use PETG: it handles moisture and warmth in the bathroom and the latch arms spring better than with PLA. The ring comes off the bed closed: twist the latch open the first time. Thread the ring through the curtain hole, hang it over the rod and press the arrow tip between the arms until it clicks.

Frequently asked questions

Will the rings fit my shower rod?

They fit rods up to 25 mm across. The inside is 31 mm across the flats, so the ring slides smoothly along the rod.

How do I get the ring through the curtain?

Open the latch, thread the end through the hole in the curtain and over the rod, then press the arrow tip between the arms until it clicks.

Why PETG?

PETG handles moisture and warmth better than PLA and is tougher, so the latch arms can open and close many times.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal