Support-free
3MF + STL
Home & Living2 parts
Geometric Ring Dish
Low jewellery dish with a standing cone to slide your rings onto. Earrings, necklaces and a watch rest around it. Two shapes: hexagon and heart. A small gift for Valentine's Day or Mother's Day, prints without supports.
- Largest part
- 112.3 × 98.4 × 52 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Geometric Ring Dish is a low dish with a standing cone in the middle. Slide your rings onto the cone and place earrings, necklaces and a watch around it. You get two shapes: a clean hexagon and a heart, both with a rim that flares slightly outwards.
- Hexagon: 92 mm across the flats at the base
- Heart: 96 mm wide at the base
- Dish 14 mm tall, cone 52 mm tall with a 21 mm base
- Prints without supports, digitally checked for printability
Print tips: choose the hexagon or the heart and print upright as supplied. 0.2 mm layers, 3 walls and 15% infill. Fun with a colour change just above the floor, so the cone and rim get a different colour. A lovely small gift for Valentine's Day or Mother's Day.
You get two STL files (hexagon and heart) and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
ring-dish-hex.stl
- Dimensions (w × d × h)
- 112.3 × 98.4 × 52 mm
- File
- 81 kB
-
ring-dish-heart.stl
- Dimensions (w × d × h)
- 102.7 × 93.2 × 52 mm
- File
- 144 kB
You get all files together in one ZIP.
- ring-dish-geo.3mf66 kB
- ring-dish-heart.stl144 kB
- ring-dish-hex.stl81 kB
260 layers of 0.2 mm (ring dish hex, 52 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Choose the hexagon or the heart and print upright as supplied. Looks great with a colour change just above the floor, so the cone and rim get a different colour.
Frequently asked questions
Which ring sizes fit the cone?
The cone tapers from 21 mm at the base to 8 mm at the top, so any ring size stops somewhere along it.
Do I get both shapes?
Yes, you get the hexagon and the heart as separate STL files. Print the one you like, or both.
Can I make a two-tone dish?
Yes. Add a colour change in your slicer on a layer just above the 2 mm floor. The rim and cone then get the second colour.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
