Nederlands English
Cart 0
Place Card Holders (8)

Support-free

3MF + STL

  • Show image 1: Place Card Holders (8)

Home & Living2 parts

Place Card Holders (8)

Hexagonal place card holders for Christmas dinner, Easter or a birthday. The card leans back slightly in a slot and a springy lip holds it in place, so it does not fall over. Includes a second version for thicker card. Small, quick to print and great in two colours.

Largest part
38.4 × 34 × 14 mm
Layer
0.2 mm
Material
PLA or PETG

€1.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP
Also in the Holiday Set bundle save €5.46 View the bundle

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Place Card Holders are small hexagonal stands for Christmas dinner, Easter or a birthday. The name card leans back 8 degrees so your guests can read it easily, and a springy lip with a small ridge clamps it in place.

  • Holder: 38.4 × 34 × 14 mm, stepped hexagonal shape
  • Standard version: 1.2 mm slot with clamp, for 300 gsm card stock of 0.3 to 0.5 mm
  • Thick version: open 2 mm slot, for card up to about 1.8 mm
  • For cards 50 to 90 mm wide, slot 8.7 mm deep
  • Prints without supports, digitally checked for printability

Print tips: print 8 holders upright as supplied, 0.2 mm layers, 3 walls, 20% infill. Change colour at 5 mm height for a base in a second colour. Set the seam to the back so the slot stays smooth.

Matches the Hex Napkin Rings and the hex coasters. You get two STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 38.4 mm 14 mm

    place-card-holder.stl

    Dimensions (w × d × h)
    38.4 × 34 × 14 mm
    File
    20 kB
    Supports: None
  • 38.4 mm 14 mm

    place-card-holder-thick.stl

    Dimensions (w × d × h)
    38.4 × 34 × 14 mm
    File
    18 kB
    Supports: None

You get all files together in one ZIP.

  • place-card-holder-set.3mf10 kB
  • place-card-holder-thick.stl18 kB
  • place-card-holder.stl20 kB

70 layers of 0.2 mm (place card holder, 14 mm tall)

Layer height
0.2 mm
Walls
3
Infill
20%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print 8 holders upright as supplied: the standard version for cards of 300 gsm card stock, or the thick version for sturdy card up to about 1.8 mm. For the two-colour effect, change colour at 5 mm height (pause in the slicer or a multi-colour printer). On the standard version, set the seam to the back so the slot stays smooth. If the card is too tight, slide it in and out a few times.

Frequently asked questions

Which cards fit?

Cards 50 to 90 mm wide. The standard version is for 300 gsm card stock 0.3 to 0.5 mm thick, the thick version for sturdy card or photo paper up to about 1.8 mm.

The card is too tight, what now?

Slide the card in and out a few times so the springy lip gives a little. If your card is thicker than 0.5 mm, print the thick version with the 2 mm slot.

Can I print them in two colours?

Yes. Change colour at 5 mm height, with a pause in the slicer or a multi-colour printer. The base and the top block then each get their own colour.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal