Support-free
3MF + STL
Home & Living2 parts
Hex Photo Stand
Stepped hexagonal base with an angled slot for a photo. The large base holds a 10 x 15 cm (4 x 6 in) photo in portrait or landscape, the small one is for 54 x 86 mm mini photos. Looks great in two colours and makes a personal gift. Prints without supports.
- Largest part
- 75.6 × 66 × 21 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Hex Photo Stand is a stepped hexagonal base with a slot that leans back 12 degrees. Put a photo in and it stands neatly on your desk or windowsill. You get two sizes: a large base for 10 × 15 cm (4 × 6 in) photos in portrait or landscape, and a small base for 54 × 86 mm mini photos.
- Large base: 66 mm across the flats, 21 mm tall, 13 mm deep slot
- Small base: 46 mm across the flats, 16 mm tall, 10 mm deep slot
- 1.8 mm slot across the full width, also for a photo in a sleeve or a card
- Prints without supports, digitally checked for printability
Print tips: print both bases upright, as supplied. 0.2 mm layers, 3 walls and 30% infill for a little extra weight. Change colour at the step (12 mm on the large, 9 mm on the small base) for a two-tone base. A personal gift with your own photo.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
photo-stand-hex.3mf
- Dimensions (w × d × h)
- 75.6 × 66 × 21 mm
- File
- 7 kB
-
photo-stand-hex-mini.stl
- Dimensions (w × d × h)
- 52.5 × 46 × 16 mm
- File
- 13 kB
You get all files together in one ZIP.
- photo-stand-hex-mini.stl13 kB
- photo-stand-hex.3mf7 kB
- photo-stand-hex.stl13 kB
105 layers of 0.2 mm (photo stand hex, 21 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 30%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print both bases upright, as supplied. Change colour at the step (12 mm on the large base, 9 mm on the small one) for a two-tone base. The slot is 1.8 mm wide: a regular photo leans slightly in it, a photo in a thin sleeve or on card sits tighter.
Frequently asked questions
Which photos fit?
The large base takes 10 × 15 cm (4 × 6 in) photos in portrait or landscape. The small base is for 54 × 86 mm mini photos. The slot runs across the full width, so wider cards fit too.
Does a thin photo stand securely?
The slot is 1.8 mm and leans back 12 degrees, so the photo rests calmly. A photo in a thin sleeve or on card sits even tighter.
How do I make a two-tone base?
Add a colour change in your slicer at the step: at 12 mm on the large base and at 9 mm on the small one.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
