Support-free
3MF + STL
Home & Living2 parts
Medal Hanger
170 mm wall bar with 6 upward-angled pegs for medal ribbons; each peg holds several medals. Hexagonal ends with countersunk holes for 4 mm screws (not included). Also available as a version with a shelf above for a small trophy or photo. Prints without supports.
- Largest part
- 170 × 110 × 55 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Medal Hanger gives your medals a proper place on the wall. It is a 170 mm wide bar with 6 pegs angled 38 degrees upwards, so the ribbons do not slide off. Each peg holds several medals. The hexagonal ends carry the screw holes.
- 170 × 33 mm bar, 30 mm pegs, 18 mm apart
- Shelf version: 110 mm tall, 118 × 55 mm shelf for a small trophy or finisher photo
- Two countersunk holes for 4 mm screws, 132 mm apart (screws and wall plugs not included)
- Prints without supports, digitally checked for printability
Print tips: choose the bar or the shelf version and print it on its back, as supplied. 0.2 mm layers, 4 walls and 25% infill make the pegs strong. Looks great in two colours: switch colour at the top of the back plate so the pegs get their own colour.
You get two STL files (bar and bar with shelf) and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
medal-hanger-bar.3mf
- Dimensions (w × d × h)
- 170 × 34.3 × 32 mm
- File
- 43 kB
-
medal-hanger-bar-shelf.stl
- Dimensions (w × d × h)
- 170 × 110 × 55 mm
- File
- 105 kB
You get all files together in one ZIP.
- medal-hanger-bar-shelf.stl105 kB
- medal-hanger-bar.3mf43 kB
- medal-hanger-bar.stl96 kB
275 layers of 0.2 mm (medal hanger bar shelf, 55 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 25%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Choose the bar or the shelf version and print it on its back, as supplied. With 4 walls and 25 % infill the pegs are strong enough for a good collection of medals. Mount with two 4 mm countersunk screws and wall plugs (not included). Looks great in two colours: switch colour at the top of the back plate.
Frequently asked questions
How many medals can I hang?
There are 6 pegs, 30 mm long. Each peg takes several ribbons behind each other, so a good collection fits.
What is the shelf for?
The shelf version has a 118 × 55 mm shelf with a raised lip, for a small trophy, a photo or a race bib.
How do I mount the hanger?
With two 4 mm countersunk screws and suitable wall plugs, 132 mm apart. These are not included.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
