Support-free
3MF + STL
LED & Electronics9 parts
LED Strip Clip Set
Hexagonal clips, corner pieces and end caps to neatly fix LED strips 8, 10 or 12 mm wide, also where the adhesive backing lets go. With a countersunk hole for a small 3 mm screw, or with double-sided tape on the flat underside. Screws and tape not included, prints without supports.
- Largest part
- 52.6 × 46 × 4 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The LED Strip Clip Set holds your LED strip neatly in place, also where the adhesive backing lets go after a while. Every part is a hexagonal plate with a channel underneath that the strip drops into.
- Clips, 90 degree corner pieces and end caps
- For strips 8, 10 and 12 mm wide and up to about 2.2 mm thick
- Plates 4 mm thick, 2.4 mm deep channel with 0.3 mm clearance per side
- Clip 26 to 30 mm, corner piece 38 to 46 mm across the flats
- Countersunk hole for a 3 mm screw, or stick on with double-sided tape
- Prints without supports, digitally checked for printability
Print tips: print with the channel facing down, as supplied; the channel roof is a short bridge. 0.2 mm layers, 3 walls and 30% infill, PLA or PETG. Print as many clips as you need, for example one every 30 to 50 cm. Screws and tape are not included.
You get nine STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
led-clip-8.stl
- Dimensions (w × d × h)
- 29.5 × 26 × 4 mm
- File
- 31 kB
-
led-corner-8.stl
- Dimensions (w × d × h)
- 43.4 × 38 × 4 mm
- File
- 33 kB
-
led-endcap-8.stl
- Dimensions (w × d × h)
- 24.9 × 22 × 4 mm
- File
- 33 kB
-
led-clip-10.stl
- Dimensions (w × d × h)
- 31.8 × 28 × 4 mm
- File
- 31 kB
-
led-corner-10.stl
- Dimensions (w × d × h)
- 48 × 42 × 4 mm
- File
- 33 kB
-
led-endcap-10.stl
- Dimensions (w × d × h)
- 27.2 × 24 × 4 mm
- File
- 33 kB
-
led-clip-12.stl
- Dimensions (w × d × h)
- 34.2 × 30 × 4 mm
- File
- 31 kB
-
led-corner-12.stl
- Dimensions (w × d × h)
- 52.6 × 46 × 4 mm
- File
- 33 kB
-
led-endcap-12.stl
- Dimensions (w × d × h)
- 29.5 × 26 × 4 mm
- File
- 33 kB
You get all files together in one ZIP.
- led-clip-10.stl31 kB
- led-clip-12.stl31 kB
- led-clip-8.stl31 kB
- led-corner-10.stl33 kB
- led-corner-12.stl33 kB
- led-corner-8.stl33 kB
- led-endcap-10.stl33 kB
- led-endcap-12.stl33 kB
- led-endcap-8.stl33 kB
- led-strip-clip-set.3mf72 kB
20 layers of 0.2 mm (led clip 8, 4 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 30%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print with the channel facing down, as supplied; the channel roof is a short bridge that prints without supports. Pick the files for your strip width and print as many as you need, for example one clip every 30 to 50 cm. Fits strips up to about 2.2 mm thick; strips with a thick silicone jacket do not fit. At a corner, fold the strip over diagonally and place the corner piece on top. 3 mm countersunk screws or double-sided tape are not included.
Frequently asked questions
Which LED strips fit?
Strips 8, 10 and 12 mm wide and up to about 2.2 mm thick. Strips with a thick silicone jacket do not fit the channel.
How do I use the corner piece?
Fold the strip over diagonally so it turns 90 degrees and place the corner piece on top. The L-shaped channel keeps both sides in place.
Screws or tape?
Either works. Use a 3 mm countersunk screw, or a piece of double-sided tape on the flat underside next to the channel.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
