Support-free
3MF + STL
Desk2 parts
Arc Headphone Stand
Headphone stand with a wide curved saddle and round trumpet base. Two parts with a sturdy plug-in joint (0.2 mm clearance), column printed flat for maximum strength. Fits a 180 mm bed, no supports.
- Largest part
- 144 × 144 × 80 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€4.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Arc Headphone Stand is a desk headphone stand you print yourself. Its wide, curved saddle (123 mm wide, 36 mm deep) spreads the weight across the headband, so there is no single pressure point. The round trumpet base keeps the stand steady.
You print two parts that slot together with a plug-in joint. The joint has 0.2 mm clearance per side: it holds without glue, and a drop of CA glue makes it permanent. The column prints flat on the bed, so the layers run along its length for maximum strength.
- Assembled: 144 × 144 × 228 mm
- Base: 144 × 144 × 80 mm, column: 128.5 × 178 × 36 mm
- Fits a 180 × 180 mm print bed
- Prints without supports, digitally checked for printability
Print tips: 0.2 mm layers, 4 walls, 20% infill. Give the base 30 to 40% infill for extra weight. The base has recesses for four 10 mm anti-slip bumpers; their ceilings are short 10.6 mm bridges. PLA is fine indoors; PETG is a little tougher.
You get both parts as separate STL files and together in one 3MF file. Suitable for any headphones or headset whose headband fits the saddle.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
base.stl
- Dimensions (w × d × h)
- 144 × 144 × 80 mm
- File
- 1.4 MB
-
column.stl
- Dimensions (w × d × h)
- 128.5 × 178 × 36 mm
- File
- 543 kB
You get all files together in one ZIP.
- arc-headphone-stand.3mf599 kB
- base.stl1.4 MB
- column.stl543 kB
400 layers of 0.2 mm (base, 80 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 20%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print column.stl flat as supplied (rounded side up). Print base.stl upright, 30-40% infill adds weight. The tenon fits with 0.2 mm clearance; no glue needed, a drop of CA glue makes it permanent. Recesses for 4 x 10 mm anti-slip bumpers: their ceilings are short 10.6 mm bridges.
Frequently asked questions
How strong is this headphone stand?
The column is printed flat, so the layers run along its length, which is the strongest orientation for an upright column. With 4 walls and 20% infill it is designed to carry ordinary headphones or a headset.
Do I need glue?
No. The tenon fits with 0.2 mm clearance per side and holds by friction. For a permanent joint, add a drop of CA glue.
Will it fit a small printer?
Yes. The largest part, the base, is 144 × 144 mm. Both parts fit a 180 × 180 mm bed.
Does it need supports?
No. Both parts are designed to print without supports. The only bridges are the ceilings of the bumper recesses, at 10.6 mm.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
