Nederlands English
Cart 0
Hex Wall Clock

Support-free

3MF + STL

  • Show image 1: Hex Wall Clock

Home & Living1 part

Hex Wall Clock

Hexagonal 170 mm clock face with raised hour markers, great in two colours with a single colour change. You also need a standard quartz clock movement with hands (7.5 to 8 mm shaft, about 56 x 56 mm); it is not included. Prints flat without supports.

Size
147.2 × 168.8 × 6 mm
Layer
0.2 mm
Material
PLA or PETG

€3.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Hex Wall Clock is a flat hexagonal clock face with raised hour markers. A single colour change gives the markers and the ring around the centre a second colour, so the clock stands out on the wall.

  • 170 mm across the corners, 147 mm across the flats, 6 mm thick
  • 8.6 mm hole for a movement with a 7.5 to 8 mm shaft
  • 30 mm recess at the front, so the face is 3 mm thick at the shaft
  • Prints without supports, digitally checked for printability

Please note: you need a separate standard quartz clock movement with hands (about 56 × 56 mm, minute hand 60 to 65 mm). It is not included.

Print tips: print with the back on the bed. 0.2 mm layers, 3 walls and 15% infill. Change filament at 4.4 mm for markers in a second colour.

You get one STL file and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 147.2 mm 6 mm

    hex-wall-clock-dial.stl

    Dimensions (w × d × h)
    147.2 × 168.8 × 6 mm
    File
    75 kB
    Supports: None

You get all files together in one ZIP.

  • hex-wall-clock-dial.stl75 kB
  • hex-wall-clock.3mf18 kB

30 layers of 0.2 mm (hex wall clock dial, 6 mm tall)

Layer height
0.2 mm
Walls
3
Infill
15%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print with the back on the bed, as supplied. Change filament at 4.4 mm for hour markers in a second colour. Not included: a standard quartz clock movement with a 7.5 to 8 mm shaft and hands (minute hand about 60 to 65 mm). Push the shaft through the hole from the back, fix it with the washer and nut, and hang the clock from the hanger on the movement.

Frequently asked questions

Which clock movement fits?

A standard quartz clock movement with a 7.5 to 8 mm shaft, suitable for a clock face up to about 3 mm thick. The movement with hands is not included.

How do I hang the clock?

From the hanger on the movement. The face is held in place by the washer and nut of the movement.

How do I get two colours?

Change filament at a height of 4.4 mm. The hour markers and the ring around the centre then get the second colour.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal