Nederlands English
Cart 0
Hex Wall Art Tiles (7)

Support-free

3MF + STL

  • Show image 1: Hex Wall Art Tiles (7)

Home & Living3 parts

Hex Wall Art Tiles (7)

Seven 80 mm hexagonal wall tiles with relief in three patterns: steps, wave and diamond. A colour change by layer gives each pattern a second colour. Arrange them as a honeycomb on the wall and mount them with adhesive strips or double-sided mounting tape (not included). Prints flat without supports.

Largest part
80 × 91.4 × 7 mm
Layer
0.2 mm
Material
PLA

€2.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Hex Wall Art Tiles are seven hexagonal relief tiles that you hang on the wall as a honeycomb. There are three patterns: steps, wave and diamond. A colour change by layer gives the relief a second colour.

  • Each tile 80 mm across the flats and 92 mm across the corners
  • Tile 3 mm thick, relief up to 7.8 mm in total
  • Set of 7: 3 times steps, 2 times wave and 2 times diamond
  • A honeycomb of 7 is about 25 × 24 cm
  • Prints without supports, digitally checked for printability

Print tips: print flat with the back on the bed. 0.2 mm layers, 3 walls and 15% infill. Change filament at 3 mm for the relief; on the steps tile you can change again at 4.6 and 6.2 mm. Mount with adhesive strips or double-sided mounting tape (not included).

You get three STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 80 mm 7.8 mm

    hex-art-tile-steps.stl

    Dimensions (w × d × h)
    80 × 91.4 × 7.8 mm
    File
    23 kB
    Supports: None
  • 80 mm 7 mm

    hex-art-tile-wave.stl

    Dimensions (w × d × h)
    80 × 91.4 × 7 mm
    File
    40 kB
    Supports: None
  • 80 mm 7.2 mm

    hex-art-tile-diamond.stl

    Dimensions (w × d × h)
    80 × 91.4 × 7.2 mm
    File
    24 kB
    Supports: None

You get all files together in one ZIP.

  • hex-art-tile-diamond.stl24 kB
  • hex-art-tile-steps.stl23 kB
  • hex-art-tile-wave.stl40 kB
  • hex-wall-art-tiles.3mf23 kB

39 layers of 0.2 mm (hex art tile steps, 7.8 mm tall)

Layer height
0.2 mm
Walls
3
Infill
15%
Supports
Not needed
Material
PLA

Designer's tip

Print flat with the back on the bed, as supplied: 3 times steps, 2 times wave and 2 times diamond, or your own mix. Change filament at 3 mm for relief in a second colour; on the steps tile you can change again at 4.6 and 6.2 mm. Mount with 1 or 2 adhesive strips or pieces of double-sided mounting tape per tile on a smooth, clean wall. Leave about 4 mm between tiles.

Frequently asked questions

How do I mount the tiles?

With 1 or 2 adhesive strips or pieces of double-sided mounting tape per tile on the flat back. Use a smooth, clean wall.

How big is the honeycomb?

With 4 mm between the tiles, the honeycomb of 7 is about 25 cm wide and 24 cm tall. You can print more tiles and extend it.

Can I print the tiles in one colour?

Yes. The relief shows well in one colour thanks to light and shadow. A colour change by layer makes the pattern stand out more.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal