Support-free
3MF + STL
Home & Living2 parts
Hex coasters with holder
Four hexagonal coasters with a recessed honeycomb pattern, so a wet glass does not stick. They store neatly in an open hexagonal holder with a thumb opening. Looks great in two alternating colours.
- Largest part
- 89.1 × 78 × 3.6 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Hex coasters with holder are four hexagonal coasters with a recessed honeycomb pattern, so a wet glass does not stick. When you are not using them, they sit neatly in an open hexagonal holder with a thumb opening to lift them out.
- Coaster: 78 mm across flats, 90 mm across corners, 3.6 mm thick
- Holder: 94.4 × 83.2 × 18 mm
- Four coasters and one holder
- Prints without supports, digitally checked for printability
Print tips: print the coaster four times and the holder once, flat as supplied. 0.2 mm layers, 3 walls, 20% infill. PETG handles a hot mug of tea better than PLA. For an anti-slip finish, stick a felt or cork disc under each coaster.
Great in two alternating colours, and a nice gift. You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
hex-coaster.stl
- Dimensions (w × d × h)
- 89.1 × 78 × 3.6 mm
- File
- 46 kB
-
hex-coaster-holder.stl
- Dimensions (w × d × h)
- 94.4 × 83.2 × 18 mm
- File
- 45 kB
You get all files together in one ZIP.
- hex-coaster-holder.stl45 kB
- hex-coaster-set.3mf21 kB
- hex-coaster.stl46 kB
90 layers of 0.2 mm (hex coaster holder, 18 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the coaster 4 times and the holder once, flat as supplied. PETG handles a hot mug of tea better than PLA. For an anti-slip finish, stick a felt or cork disc under each coaster.
Frequently asked questions
Can I put a hot mug on them?
Print them in PETG. PLA softens around 55 to 60 °C and can warp under a hot mug or pan.
Why the honeycomb pattern?
The recessed pattern lets air under the glass, so a wet glass does not stick to the coaster.
How do I make them non-slip?
Stick a felt or cork disc under each coaster.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
