Support-free
3MF + STL
Home & Living1 part
Bathroom Counter Tray
15 cm hexagonal tray for next to the sink, with three compartments: a soap section with ribs so the soap stays dry, a jewellery section with a ring cone and a section for a contact lens case or toothpaste. Matches the toothbrush stand. Prints without supports.
- Size
- 171.6 × 150 × 31.2 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Bathroom Counter Tray is a hexagonal tray with three compartments. The soap section has ribs, so the soap stays dry and water drains away between the ribs. The jewellery section has a cone for rings you take off for a moment. The third section is for a contact lens case, toothpaste or razor. The tray matches the style of the toothbrush stand.
- 150 mm across the flats, 173 mm corner to corner, 18 mm tall
- Three diamond-shaped sections with 12 mm dividers
- 3.5 mm ribs in the soap section, 26 mm cone for rings
- Prints without supports, digitally checked for printability
Print tips: print upright as supplied. The tray just fits a 180 mm bed; rotate it in your slicer if needed. PETG handles water and soap better than PLA. 0.2 mm layers, 3 walls and 15% infill.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
bathroom-counter-tray.3mf
- Dimensions (w × d × h)
- 171.6 × 150 × 31.2 mm
- File
- 25 kB
You get all files together in one ZIP.
- bathroom-counter-tray.3mf25 kB
- bathroom-counter-tray.stl102 kB
156 layers of 0.2 mm (bathroom counter tray, 31.2 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print upright as supplied. The tray is 173 mm from corner to corner; if it does not quite fit your bed, rotate it in the slicer. PETG handles water and soap better than PLA. Rinse the soap section now and then; the grooves between the ribs run to the rim.
Frequently asked questions
Does the soap stay dry?
The soap rests on 3.5 mm ribs. Water runs through the grooves between them to the rim, where it is easy to rinse away.
Will it fit my printer?
The tray is 172 mm corner to corner and fits a 180 × 180 mm bed. Rotate it in the slicer if it is tight.
Which material do you recommend?
PETG, because it handles water and soap better. PLA also works if the tray is not wet all the time.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
