Support-free
3MF + STL
Pets2 parts
Dog Poop Bag Dispenser
Hexagonal tube for a roll of dog poop bags up to 33 mm thick and 60 mm wide. Pull the bags out one at a time through the slit in the front. A spring clip on the back slides over a flat lead up to about 3.5 mm thick. Bags not included, prints without supports.
- Largest part
- 45.7 × 48.6 × 69.6 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Dog Poop Bag Dispenser is a hexagonal tube for a roll of dog poop bags. Pull the bags out one at a time through the slit in the front, and the spring clip on the back keeps it on the lead.
- Tube about 46 × 49 × 70 mm
- For rolls up to 33 mm thick and 60 mm wide
- 4 × 52 mm dispensing slit with a pointed top
- 22 mm wide spring clip for a flat lead up to about 3.5 mm thick
- Cap that clamps into the tube
- Prints without supports, digitally checked for printability
Print tips: print the tube standing on its base and the cap on its back. PETG is recommended: the clip springs better and it handles rain and sun. 0.2 mm layers, 3 walls and 20% infill. Bags are not included.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
poop-bag-dispenser-body.stl
- Dimensions (w × d × h)
- 45.7 × 48.6 × 69.6 mm
- File
- 35 kB
-
poop-bag-dispenser-cap.stl
- Dimensions (w × d × h)
- 45.7 × 40.4 × 8.4 mm
- File
- 52 kB
You get all files together in one ZIP.
- poop-bag-dispenser-body.stl35 kB
- poop-bag-dispenser-cap.stl52 kB
- poop-bag-dispenser.3mf24 kB
348 layers of 0.2 mm (poop bag dispenser body, 69.6 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print the tube standing on its base and the cap on its back, as supplied. PETG is recommended: the clip springs better and it handles rain and sun. Put the roll in, pull the first bag through the slit and press the cap on. If the cap is too loose or too tight, adjust PLUG_FIT in model.py. Fits flat leads up to about 3.5 mm thick; the clip is not meant for round leads.
Frequently asked questions
Which rolls fit?
Rolls up to 33 mm thick and 60 mm wide, the most common sizes. For other sizes, adjust the included model.py.
Does the clip fit any lead?
The clip is made for flat leads up to about 3.5 mm thick. It is not meant for round leads.
The cap is too loose or too tight, what now?
Adjust the cap fit in the included model.py and reprint just the cap. A few hundredths of a millimetre already make a difference.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
