Support-free
3MF + STL
Pets1 part
Tilted Cat Bowl Riser
Hexagonal riser that tilts an ordinary stainless steel food bowl 15 degrees forward, with honeycomb windows in the walls. The bowl rests with its sloped side on the chamfered inner rim and lifts out for washing. Fits bowls of roughly 13 to 15 cm across the top. Bowl and anti-slip pads not included, prints without supports.
- Size
- 152.8 × 134 × 95.9 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Tilted Cat Bowl Riser lifts an ordinary stainless steel food bowl and tilts it 15 degrees forward. Your cat does not have to bend down as far and reaches the last bits of food more easily.
- Hexagon of 155 × 134 mm
- Front 60 mm high, back 96 mm
- Chamfered 128 mm inner rim that the bowl rests on
- Fits bowls of roughly 13 to 15 cm across the top and up to about 55 mm deep
- Honeycomb windows in the walls and an inner flange for stability
- Prints without supports, digitally checked for printability
Print tips: print upright on the flange, as supplied. 0.2 mm layers, 3 walls and 15% infill, PLA or PETG. Stick six self-adhesive rubber pads of about 10 mm under the corners so the riser does not slide. Bowl and pads are not included.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
cat-bowl-riser.3mf
- Dimensions (w × d × h)
- 152.8 × 134 × 95.9 mm
- File
- 17 kB
You get all files together in one ZIP.
- cat-bowl-riser.3mf17 kB
- cat-bowl-riser.stl73 kB
480 layers of 0.2 mm (cat bowl riser, 95.9 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print upright on the flange, as supplied. Measure your bowl: on the outside it should be slightly wider than 128 mm where it is meant to rest, and no deeper than about 55 mm below the rim. If it does not fit, change SEAT_D in model.py. Stick six self-adhesive rubber pads of about 10 mm under the corners so the riser does not slide.
Frequently asked questions
Which food bowl fits?
An ordinary stainless steel bowl of roughly 13 to 15 cm across the top that is slightly wider than 128 mm where it rests. If yours does not fit, adjust the seat size in the included model.py.
Can I take the bowl out for washing?
Yes, the bowl rests loosely on the chamfered inner rim. You simply lift it out.
Will the riser slide around?
Stick six self-adhesive rubber pads under the corners. They are not included, but easy to find in any hardware store.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
