Nederlands English
Cart 0
Leash Hook Rail

Support-free

3MF + STL

  • Show image 1: Leash Hook Rail

Pets2 parts

Leash Hook Rail

Hexagonal hallway wall plate with three angled hooks for leads and collars, plus a separate hexagonal cup for poop bags and treats. The cup slides down onto a dovetail rib, so it lifts off easily for refilling. Mount with two 4 mm countersunk screws (not included). Prints without supports.

Largest part
168.4 × 76 × 38.3 mm
Layer
0.2 mm
Material
PLA or PETG

€2.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Leash Hook Rail gives leads, collars and poop bags a fixed spot by the door. An elongated hexagonal plate with three angled hooks, plus a separate hexagonal cup that slides down onto a dovetail rib.

  • Wall plate 170 × 76 mm, 5 mm thick
  • Three hexagonal hooks of 38 mm, angled 52 degrees upwards
  • Cup 68 × 68 × 70 mm, 56 mm across the inside flats
  • Two countersunk holes for 4 mm screws, 73 mm apart
  • Prints without supports, digitally checked for printability

Print tips: print the rail on its back and the cup standing up, as supplied. Use 4 walls and 30% infill, 0.2 mm layers, PLA or PETG. Mount the rail with two 4 mm countersunk screws and wall plugs; these are not included. Adhesive strips are not strong enough for a lead that gets pulled.

You get two STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 168.4 mm 38.3 mm

    leash-hook-rail.3mf

    Dimensions (w × d × h)
    168.4 × 76 × 38.3 mm
    File
    23 kB
    Supports: None
  • 68.3 mm 70 mm

    leash-hook-rail-cup.stl

    Dimensions (w × d × h)
    68.3 × 67.5 × 70 mm
    File
    26 kB
    Supports: None

You get all files together in one ZIP.

  • leash-hook-rail-cup.stl26 kB
  • leash-hook-rail.3mf23 kB
  • leash-hook-rail.stl67 kB

350 layers of 0.2 mm (leash hook rail cup, 70 mm tall)

Layer height
0.2 mm
Walls
4
Infill
30%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print the rail on its back and the cup standing up, as supplied. Use 4 walls and 30 % infill so the hooks are strong enough for leads and collars. Mount the rail with two 4 mm countersunk screws and wall plugs (not included); adhesive strips are not strong enough for a lead that gets pulled. Slide the cup down onto the rib from above.

Frequently asked questions

How do I mount the leash holder?

With two 4 mm countersunk screws and wall plugs, 73 mm apart. Screws and plugs are not included.

Can I take the cup off?

Yes. The cup slides down onto a dovetail rib and lifts straight off again for refilling.

What fits in the cup?

A few rolls of poop bags, dog treats or a set of keys. Inside it is 56 mm across the flats and almost 70 mm deep.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal