Support-free
3MF + STL
Workshop6 parts
Pegboard Hook Set
Set of 8 for a standard pegboard (holes of about 6 mm on a 25.4 mm grid): 3 single hooks, 2 double hooks, a tool loop, a bin and a rack for 6 screwdrivers. Everything hangs on separate L-pins that you print yourself, so it also fits a thicker or thinner board. Prints without supports.
- Largest part
- 102 × 22 × 36 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€2.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Pegboard Hook Set is a set of 8 for the workshop or craft corner: 3 single hooks, 2 double hooks, a tool loop, a bin and a rack for 6 screwdrivers. Everything hangs on separate L-pins that you print yourself.
- For a pegboard with holes of about 6.35 mm on a 25.4 mm grid
- Pins with a 4.2 mm square section, 2 per part
- Hook arms 48 mm long, loop with a 28 mm inside diameter
- Bin inside 72 x 42 x 30 mm
- Rack 102 mm wide with 6 hexagonal holes
- Prints without supports, digitally checked for printability
Print tips: print the hooks, loop, bin and rack upright, as supplied. Print the pins flat with 100% infill. 0.2 mm layers, 4 walls and 30% infill for the rest. Push the pin through the back plate from the front, hook it into the board at an angle and let the part drop. Made for a 5 mm board with at least 12 mm of space behind it.
You get six STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
pegboard-single-hook.stl
- Dimensions (w × d × h)
- 36 × 36.9 × 54.5 mm
- File
- 19 kB
-
pegboard-double-hook.stl
- Dimensions (w × d × h)
- 48 × 36.9 × 54.5 mm
- File
- 21 kB
-
pegboard-tool-loop.stl
- Dimensions (w × d × h)
- 40 × 39 × 44 mm
- File
- 87 kB
-
pegboard-bin.stl
- Dimensions (w × d × h)
- 76 × 46 × 44 mm
- File
- 37 kB
-
pegboard-screwdriver-rack.stl
- Dimensions (w × d × h)
- 102 × 22 × 36 mm
- File
- 42 kB
-
pegboard-pin.stl
- Dimensions (w × d × h)
- 17.1 × 15.6 × 4.2 mm
- File
- 4 kB
You get all files together in one ZIP.
- pegboard-bin.stl37 kB
- pegboard-double-hook.stl21 kB
- pegboard-hook-set.3mf48 kB
- pegboard-pin.stl4 kB
- pegboard-screwdriver-rack.stl42 kB
- pegboard-single-hook.stl19 kB
- pegboard-tool-loop.stl87 kB
273 layers of 0.2 mm (pegboard single hook, 54.5 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 30%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print the hooks, loop, bin and rack upright as supplied. Print the pins flat, with 100 % infill. You need 2 pins per part (16 for the whole set). Push the pin through the back plate from the front, hook it into the board at an angle and let the part drop. Made for a 5 mm board with at least 12 mm of space behind it. PETG is tougher than PLA for heavier tools.
Frequently asked questions
Will this fit my pegboard?
It fits a board with holes of about 6 mm spaced 25.4 mm apart, like the common pegboard. The board should be about 3 to 6 mm thick with space behind it.
Why are the pins separate?
Printed flat, the pins are at their strongest and need no supports. The hooks and bins print upright and the pins in their strong direction.
Which material do you recommend?
PETG is tougher than PLA and better for heavier tools. Always print the pins with 100% infill.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
