Support-free
3MF + STL
Workshop2 parts
Filament Spool Clips (10)
Hexagonal clips that hold the loose filament end on the rim of the spool, so it does not unwind or tangle. Write the colour or material on the flat hexagon. Two sizes for thin and thick spool rims, for 1.75 mm filament. Prints without supports.
- Largest part
- 24.9 × 39.5 × 6 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Filament Spool Clips keep the loose end of your filament on the spool rim, so it does not unwind or tangle. Push the end through the hole, bend it over and click the clip onto the rim.
- 22 mm hexagon to write the colour or material on
- Clip 25 × 40 mm and 6 mm thick
- Size S for spool rims of about 2 to 3 mm, size L for 3.5 to 4.5 mm
- 2.3 mm hole for 1.75 mm filament
- Prints without supports, digitally checked for printability
Print tips: print flat, as supplied. 0.2 mm layers, 3 walls and 100% infill, PLA or PETG. Measure the rim of your spool and print 10 clips of the size that fits; they easily fit on the bed together. Write on the hexagon with a permanent marker.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
filament-clip-s.stl
- Dimensions (w × d × h)
- 24.9 × 39.5 × 6 mm
- File
- 48 kB
-
filament-clip-l.stl
- Dimensions (w × d × h)
- 24.9 × 39.5 × 6 mm
- File
- 48 kB
You get all files together in one ZIP.
- filament-clip-l.stl48 kB
- filament-clip-s.stl48 kB
- filament-clip-set.3mf24 kB
30 layers of 0.2 mm (filament clip s, 6 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 100%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print flat, as supplied. Measure the rim of your spool: pick the small size for rims of about 2 to 3 mm (usually plastic spools) and the large size for about 3.5 to 4.5 mm (usually cardboard spools). Print 10 of the size that fits; they easily fit on the bed together. Push the filament end through the hole, bend it over and click the clip onto the rim. Write on the hexagon with a permanent marker.
Frequently asked questions
Which size should I choose?
Measure the thickness of the spool rim. Size S fits rims of about 2 to 3 mm, usually plastic spools. Size L fits 3.5 to 4.5 mm, usually cardboard spools.
Does it work with 2.85 mm filament?
The hole is 2.3 mm, made for 1.75 mm filament. For thicker filament, enlarge the hole in the included model.py.
Can I write on the clip?
Yes, the hexagon is flat. A permanent marker works best on PLA and PETG.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
