Support-free
3MF + STL
Car and bike2 parts
Car Visor Glasses Clip
Clamps onto the sun visor in your car and holds your sunglasses or reading glasses with a spring lip behind a hexagonal front. Two sizes, for visors about 18 to 22 mm and 24 to 28 mm thick. Print in PETG or ASA: PLA deforms in a hot car. Prints without supports.
- Largest part
- 37.6 × 44.8 × 24 mm
- Layer
- 0.2 mm
- Material
- PETG or ASA
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Car Visor Glasses Clip clamps onto the sun visor in your car and holds your sunglasses or reading glasses. Slide one arm of the glasses between the spring lip and the hexagonal front, and they are ready to grab without sliding around.
- Clip 24 mm wide and 45 mm deep
- Size S for visors about 18 to 22 mm thick, size L for 24 to 28 mm
- The legs angle 1.5 mm towards each other to grip the visor
- Spring lip with a 2.6 mm gap at the base for the arm of the glasses
- Prints without supports, digitally checked for printability
Print tips: print on its side, as supplied. Use PETG or ASA with 4 walls and 100% infill: in a car in the sun, PLA softens and deforms. Measure your visor and pick the size that fits. Make sure the glasses do not block your view.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
car-visor-glasses-clip-s.stl
- Dimensions (w × d × h)
- 31.6 × 44.8 × 24 mm
- File
- 9 kB
-
car-visor-glasses-clip-l.stl
- Dimensions (w × d × h)
- 37.6 × 44.8 × 24 mm
- File
- 9 kB
You get all files together in one ZIP.
- car-visor-glasses-clip-l.stl9 kB
- car-visor-glasses-clip-s.stl9 kB
- car-visor-glasses-clip.3mf5 kB
120 layers of 0.2 mm (car visor glasses clip s, 24 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 100%
- Supports
- Not needed
- Material
- PETG or ASA
Designer's tip
Print on its side, as supplied, so the clamp and lip flex along the layers. Use PETG or ASA: a car in the sun gets hot enough for PLA to soften and deform. Measure your visor's thickness and pick the size that fits. Slide the clip over the edge and one arm of the glasses between lip and clip. Make sure the glasses do not block your view and do not handle them while driving.
Frequently asked questions
Which size fits my visor?
Measure the thickness of the visor. Size S fits about 18 to 22 mm, size L fits 24 to 28 mm.
Why not PLA?
A car in the sun gets hot enough inside for PLA to soften and deform. PETG and especially ASA handle that heat better.
Will any pair of glasses fit?
The spring lip holds an arm of about 1 to 3 mm thick. That covers most sunglasses and reading glasses.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
