Support-free
3MF + STL
Car and bike1 part
Car Cup Holder Insert
Slightly tapered insert that drops into your car's cup holder, with a hexagonal collar on top. Inside are a slot where your phone stands upright, a deep compartment for keys and a shallower one for coins. Fits cup holders of about 67 to 73 mm (size adjustable). Print in PETG or ASA, no supports needed.
- Size
- 95.7 × 84 × 75.9 mm
- Layer
- 0.2 mm
- Material
- PETG or ASA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Car Cup Holder Insert turns an empty cup holder into storage. The slightly tapered insert drops into the holder, the hexagonal collar rests on the rim and inside everything has its own compartment.
- 66 mm at the bottom and 72 mm at the top of the taper, for cup holders of about 67 to 73 mm
- Hexagonal collar of 97 × 84 mm, total height 76 mm
- 14 mm wide phone slot in the middle
- Deep compartment for keys and a coin compartment with its floor at 30 mm
- Prints without supports, digitally checked for printability
Print tips: print upright, as supplied. Use PETG or ASA with 3 walls and 15% infill: PLA softens in a car in the sun. Measure your cup holder at the top and bottom and adjust the diameters in the included model.py if it does not fit. Do not handle your phone while driving.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
car-cupholder-tray.3mf
- Dimensions (w × d × h)
- 95.7 × 84 × 75.9 mm
- File
- 34 kB
You get all files together in one ZIP.
- car-cupholder-tray.3mf34 kB
- car-cupholder-tray.stl118 kB
380 layers of 0.2 mm (car cupholder tray, 75.9 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PETG or ASA
Designer's tip
Print upright, as supplied. Use PETG or ASA: PLA softens in a car in the sun. Measure your cup holder at the top and bottom and adjust D_BOT and D_TOP in model.py if it does not fit. The phone stands upright in the slot and leans on the collar; do not handle it while driving.
Frequently asked questions
Will the insert fit my cup holder?
It fits cup holders of about 67 to 73 mm. Measure yours at the top and bottom and adjust the diameters in the included model.py if needed.
Will my phone fit in the slot?
The slot is 14 mm wide, enough for most phones with a case. The phone stands upright and leans on the hexagonal collar.
Which material should I use?
PETG or ASA. A car in the sun gets hot enough for PLA to soften and deform.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
