Nederlands English
Cart 0
Vertical Laptop Stand

Support-free

3MF + STL

  • Show image 1: Vertical Laptop Stand
  • Show image 2: Vertical Laptop Stand, detail
  • Show image 3: Vertical Laptop Stand, separate parts

Desk7 parts

Vertical Laptop Stand

Stand your closed laptop upright next to your monitor, with a second slot for a tablet or e-reader (up to 12 mm). Swap the inserts for laptops 12, 15, 18, 21, 24 or 28 mm thick; they slide into the cheeks on a dovetail and have a soft wave profile. Wide base with recesses for rubber feet, same arc shape as the Arc Headphone Stand. Support-free.

Largest part
95 × 150 × 65 mm
Layer
0.2 mm
Material
PLA or PETG (inzetstukken eventueel TPU)

€3.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Vertical Laptop Stand holds your closed laptop upright next to your monitor. Work with an external screen and keyboard and keep your desk clear. Next to the laptop slot is a second 14 mm slot for a tablet or e-reader up to 12 mm thick.

Laptops vary in thickness. So instead of a screw or sliding mechanism, the stand uses swappable inserts. They slide into the cheeks on a dovetail and have a soft wave profile that grips the laptop. There are inserts for laptops 12, 15, 18, 21, 24 and 28 mm thick; you print two of the thickness you need.

  • Stand: 95 × 150 mm base, 65 mm tall
  • 36 mm laptop slot, with inserts for 12 to 28 mm
  • 14 mm tablet slot (tablet with case up to 12 mm)
  • Recesses for 4 × 10 mm rubber feet
  • No supports, digitally checked for printability

Print tips: 0.2 mm layers, 5 walls and 30% infill: heavier is more stable. Print the stand and the inserts upright. Pick the insert equal to or just above your laptop's thickness. PLA or PETG; for extra scratch protection, print the inserts in TPU.

Same arc shape as the Arc Headphone Stand, so they look good side by side. You get seven STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 95 mm 65 mm

    stand.stl

    Dimensions (w × d × h)
    95 × 150 × 65 mm
    File
    621 kB
    Supports: None
  • 13.6 mm 40 mm

    insert-12mm.stl

    Dimensions (w × d × h)
    13.6 × 50 × 40 mm
    File
    20 kB
    Supports: None
  • 12.1 mm 40 mm

    insert-15mm.stl

    Dimensions (w × d × h)
    12.1 × 50 × 40 mm
    File
    20 kB
    Supports: None
  • 10.6 mm 40 mm

    insert-18mm.stl

    Dimensions (w × d × h)
    10.6 × 50 × 40 mm
    File
    20 kB
    Supports: None
  • 9.1 mm 40 mm

    insert-21mm.stl

    Dimensions (w × d × h)
    9.1 × 50 × 40 mm
    File
    20 kB
    Supports: None
  • 7.6 mm 40 mm

    insert-24mm.stl

    Dimensions (w × d × h)
    7.6 × 50 × 40 mm
    File
    20 kB
    Supports: None
  • 5.6 mm 40 mm

    insert-28mm.stl

    Dimensions (w × d × h)
    5.6 × 50 × 40 mm
    File
    20 kB
    Supports: None

You get all files together in one ZIP.

  • insert-12mm.stl20 kB
  • insert-15mm.stl20 kB
  • insert-18mm.stl20 kB
  • insert-21mm.stl20 kB
  • insert-24mm.stl20 kB
  • insert-28mm.stl20 kB
  • stand.stl621 kB
  • vertical-laptop-stand.3mf157 kB

325 layers of 0.2 mm (stand, 65 mm tall)

Layer height
0.2 mm
Walls
5
Infill
30%
Supports
Not needed
Material
PLA or PETG (inzetstukken eventueel TPU)

Designer's tip

Print the stand upright with 5 walls and 30% infill: heavier is more stable. Print the inserts upright, 2 of the thickness you need; they fit left and right. Pick the insert equal to or just above your laptop's thickness. Stick 4 rubber feet of 10 mm under the base. For extra scratch protection you can print the inserts in TPU.

Frequently asked questions

Will my laptop fit?

Measure your laptop's thickness when closed. There are inserts for 12, 15, 18, 21, 24 and 28 mm. Choose the insert equal to or just above that thickness.

Will it tip over with a heavy laptop?

Print it with 5 walls and 30% infill so it is heavy, and stick 4 × 10 mm rubber feet into the recesses under the base.

Will it scratch my laptop?

The inserts have a wave profile that touches the laptop at a few points. For extra protection, print the inserts in TPU.

Can it hold a tablet too?

Yes. The second slot is 14 mm wide, for a tablet or e-reader up to 12 mm thick including its case.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal