Support-free
3MF + STL
Desk1 part
Under-desk headphone hook
Compact hook that screws under your desktop. Your headphones hang out of sight and within reach, with a raised lip so they do not slide off. Room for a headband up to 35 mm thick, two countersunk holes for M4 screws.
- Size
- 58 × 51 × 28 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Under-desk headphone hook screws under your desktop. Your headphones or headset hang out of sight but within reach, and a raised lip keeps them from sliding off.
- Size: 58 × 51 × 28 mm, 56 mm mounting plate
- Room for a headband up to 35 mm thick
- Two countersunk holes, 30 mm apart, for 4 mm wood screws or M4
- Prints without supports, digitally checked for printability
Print tips: print the hook on its side, as supplied. The layers then run through the bend, which makes it strongest. 0.2 mm layers, 4 walls, 30% infill, PETG or PLA. The screw holes have a small peak at the top that disappears when you tighten the screw.
Mounting: two 4 × 16 mm countersunk wood screws. Use shorter screws on a thin desktop. You get one STL and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
under-desk-headphone-hook.3mf
- Dimensions (w × d × h)
- 58 × 51 × 28 mm
- File
- 17 kB
You get all files together in one ZIP.
- under-desk-headphone-hook.3mf17 kB
- under-desk-headphone-hook.stl70 kB
140 layers of 0.2 mm (under desk headphone hook, 28 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 30%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print on its side as supplied: the layers then run through the bend of the hook, which makes it strongest. The screw holes have a small peak at the top that disappears when you tighten the screw. Use two 4 x 16 mm countersunk wood screws.
Frequently asked questions
Which screws do I need?
Two 4 × 16 mm countersunk wood screws. Make sure they are shorter than your desktop is thick.
Will my headphones fit?
The hook has room for a headband up to 35 mm thick, which suits most headphones and headsets.
Is a printed hook strong enough?
Yes, if you print it on its side as supplied, with 4 walls and 30% infill. The layers then run through the bend, the strong direction.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
