Support-free
3MF + STL
Planters2 parts
Stackable Seedling Pots
Square 52 mm seedling pots with five drainage holes, plus a tray for four. Low ribs keep the pots above excess water. Empty pots nest inside each other, so they take up little space after the season. Support-free.
- Largest part
- 112.2 × 112.2 × 12 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Stackable Seedling Pots are square pots for germinating seeds and growing on cuttings. Each pot has five 5 mm drainage holes. A tray holds four pots together, and low ribs keep them above excess water.
- Pot: 52 × 52 × 50 mm, 40 mm base
- Tray: 112.2 × 112.2 × 12 mm, for four pots
- Empty pots nest inside each other (14.5 mm per pot), so they take up little space after the season
- Prints without supports, digitally checked for printability
Print tips: print pots and tray floor-down, as supplied. 0.2 mm layers, 2 walls, 15% infill. Print four pots to fill the tray. Use at least 5 bottom layers for the tray so it is watertight. PETG lasts longer in damp soil.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
pot.stl
- Dimensions (w × d × h)
- 52 × 52 × 50 mm
- File
- 103 kB
-
tray.stl
- Dimensions (w × d × h)
- 112.2 × 112.2 × 12 mm
- File
- 49 kB
You get all files together in one ZIP.
- pot.stl103 kB
- seedling-pot-set.3mf34 kB
- tray.stl49 kB
250 layers of 0.2 mm (pot, 50 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 2
- Infill
- 15%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print pots and tray floor-down, as oriented in the files. Print four pots to fill the tray. Use at least 5 bottom layers for the tray so it is watertight. PETG lasts longer in damp soil.
Frequently asked questions
How many pots fit on the tray?
Four 52 × 52 mm pots.
Does the tray leak?
Print it with at least 5 bottom layers and it holds water. See also our guide to watertight planters.
Can I reuse the pots?
Yes. Rinse them after the season and nest them; each extra pot adds only 14.5 mm.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
