Support-free
3MF + STL
Planters2 parts
Plant Pot Feet
Hexagonal feet that lift your plant pot, so air gets underneath and water can drain from the hole. A raised lip on the outside keeps the pot in place. In 16 and 26 mm high; use three or four under a pot. Support-free.
- Largest part
- 31.1 × 35.2 × 29 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Plant Pot Feet are hexagonal feet that lift your plant pot. Air gets under the pot and water from the drainage hole can run off instead of sitting under it. A raised lip on the outside keeps the pot in place.
- Low: 31.1 × 35.1 × 19 mm, lifts the pot 16 mm
- Tall: 31.1 × 35.2 × 29 mm, lifts the pot 26 mm
- For pots with a base from about 80 mm
- Prints without supports, digitally checked for printability
Print tips: print with the wide side on the bed, as supplied. 0.2 mm layers, 3 walls, 25% infill, PETG or PLA. Print three for a small pot or four for a large one. Place the feet with the raised lip facing outwards, just under the edge of the pot base.
For outdoors we recommend PETG. You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
foot.stl
- Dimensions (w × d × h)
- 31.1 × 35.1 × 19 mm
- File
- 17 kB
-
foot-tall.stl
- Dimensions (w × d × h)
- 31.1 × 35.2 × 29 mm
- File
- 17 kB
You get all files together in one ZIP.
- foot-tall.stl17 kB
- foot.stl17 kB
- plant-pot-feet.3mf11 kB
145 layers of 0.2 mm (foot tall, 29 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 25%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print with the wide side on the bed, as oriented in the files. Print three for a small or four for a large pot. Place the feet with the raised lip facing outwards, just under the edge of the pot base.
Frequently asked questions
How many feet do I need?
Three for a small pot, four for a large one. The pot base should be at least about 80 mm wide.
Why lift a pot?
Air gets under the pot and water from the drainage hole can run off. That helps against waterlogged roots and stains on the floor or patio.
Can I use them outdoors?
Yes, print them in PETG. PLA warps in the sun.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
