Support-free
3MF + STL
Gaming2 parts
Mini Token Box
Small lidded box for pawns, cubes and tokens: one box per player colour keeps your game box tidy. Two compartments, a thumb notch to lift the lid and a smooth lid to write on or put a sticker on. 64 x 44 x 28 mm. Support-free.
- Largest part
- 64 × 44 × 26 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Mini Token Box is a small lidded box for pawns, cubes, tokens and other small game pieces. Print one box per player colour and your game box stays tidy.
- Closed: 64 × 44 × 28 mm, inside 60.8 × 40.8 × 24.8 mm
- Two compartments and a thumb notch to lift the lid
- Smooth lid to write on or put a sticker on
- Lid fits with 0.2 mm clearance per side
- Prints without supports, digitally checked for printability
Print tips: print the box floor-down and the lid upside down, as supplied; this gives a smooth top. 0.2 mm layers, 3 walls, 15% infill. Print box and lid in the same filament for the best fit. If the lid is loose, put a strip of tape on the rim; if it is tight, lightly sand the rim.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
box.stl
- Dimensions (w × d × h)
- 64 × 44 × 26 mm
- File
- 47 kB
-
lid.stl
- Dimensions (w × d × h)
- 64 × 44 × 7 mm
- File
- 53 kB
You get all files together in one ZIP.
- box.stl47 kB
- lid.stl53 kB
- mini-token-box.3mf23 kB
130 layers of 0.2 mm (box, 26 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the box floor-down and the lid upside down (as oriented in the files), which gives a smooth top. Print box and lid in the same filament for the best fit. If the lid is loose, put a strip of tape on the rim; if it is tight, lightly sand the rim.
Frequently asked questions
What fits in the box?
Pawns, cubes, tokens and other small game pieces. The inside is 60.8 × 40.8 × 24.8 mm, split into two compartments.
The lid is too loose or too tight. What now?
Print box and lid in the same filament. Too loose: a strip of tape on the rim. Too tight: lightly sand the rim.
Can I label the boxes?
Yes, the lid is smooth. Write on it with a marker or add a sticker.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
