Support-free
3MF + STL
Gaming2 parts
Deck Box 100
Deck box for 100 sleeved cards (63.5 x 88 mm, 66 x 91 mm sleeves). Dovetail sliding lid that clicks shut, thumb notch to grab your cards. Two parts, support-free.
- Largest part
- 76.2 × 98 × 71.6 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€3.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Deck Box 100 is a card box you print yourself, for 100 standard-size cards (63.5 × 88 mm) in sleeves up to 66 × 91 mm. That is the size used by most collectible card games.
The lid slides into a dovetail groove and clicks shut, so the box does not open in your bag. A thumb notch makes it easy to lift the deck out.
- Outside: 76.2 × 98 × 71.6 mm
- Inside: 67 × 92 × 67 mm
- Lid: 72.5 × 94.7 × 3.4 mm
- Two parts, no supports, digitally checked for printability
Print tips: print the box floor-down and the lid upside down, as oriented in the STL. The dovetail edges overhang at 35 degrees and print without supports. 0.2 mm layers, 3 walls, 15% infill. The groove has 0.25 mm clearance per side. If the lid is tight, lightly sand the angled edges.
Note: 100 cards assumes standard sleeves. Thick or double sleeves take more room. You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
box.stl
- Dimensions (w × d × h)
- 76.2 × 98 × 71.6 mm
- File
- 69 kB
-
lid.stl
- Dimensions (w × d × h)
- 72.5 × 94.7 × 3.4 mm
- File
- 10 kB
You get all files together in one ZIP.
- box.stl69 kB
- deck-box-100.3mf19 kB
- lid.stl10 kB
358 layers of 0.2 mm (box, 71.6 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the box floor-down. Print the lid upside down (as oriented in the STL): the dovetail edges overhang 35 degrees, no supports. 0.25 mm clearance per side; if the lid is tight, lightly sand the angled edges.
Frequently asked questions
How many cards fit?
The box is designed for 100 cards of 63.5 × 88 mm in sleeves up to 66 × 91 mm, with 67 mm of inside height. Thick or double sleeves reduce the count.
Does it fit Magic: The Gathering or Pokémon cards?
Those cards use the standard size of about 63 × 88 mm, which is what the box is made for. Smaller Japanese-size cards (about 59 × 86 mm) fit too, with more room.
The lid is too tight. What can I do?
Lightly sand the angled dovetail edges. Clearance is 0.25 mm per side, and printers that over-extrude slightly make the groove tighter. You can also set a small negative horizontal expansion in your slicer.
Does the lid need supports?
No. Print the lid upside down as in the STL. The edges overhang at 35 degrees, which prints without supports.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
