Nederlands English
Cart 0
Controller Stand Duo

Support-free

3MF + STL

  • Show image 1: Controller Stand Duo
  • Show image 2: Controller Stand Duo, side view
  • Show image 3: Controller Stand Duo, stand without controllers

Gaming1 part

Controller Stand Duo

Tiered stand for two controllers (PS5 DualSense and Xbox). Both rest on their grips, leaning back 15 degrees, with a central cable channel so they can charge in place. One part, support-free.

Size
136 × 167.1 × 103.4 mm
Layer
0.2 mm
Material
PLA or PETG

€3.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Controller Stand Duo is a stand for two controllers that you print yourself. It is designed around the PS5 DualSense and the Xbox Series controller. Both rest on their grips and lean back 15 degrees, the rear one a step higher than the front, so you can see and grab both.

A 12 mm wide cable channel runs through the middle, so you can leave the controllers in place with the cable attached while they charge.

  • Size: 136 × 168 × 103 mm
  • Shelf depth: 62 mm
  • Designed for DualSense (approx. 160 × 66 × 106 mm) and Xbox Series (approx. 154 × 64 × 103 mm)
  • One part, no supports, digitally checked for printability

Print tips: print it upright as it stands, long side along the x axis. 0.2 mm layers, 3 walls, 12% infill. The pointed tunnel underneath is shaped to print without supports. Optionally add rubber feet under the four corners.

You get one STL and one 3MF. PLA is fine next to a console; choose PETG if the stand sits in direct sun or on a warm cabinet.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 136 mm 103.4 mm

    stand.stl

    Dimensions (w × d × h)
    136 × 167.1 × 103.4 mm
    File
    30 kB
    Supports: None

You get all files together in one ZIP.

  • controller-stand-duo.3mf8 kB
  • stand.stl30 kB

517 layers of 0.2 mm (stand, 103.4 mm tall)

Layer height
0.2 mm
Walls
3
Infill
12%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print upright as it stands, long side along x. The pointed tunnel underneath prints without supports. Optionally add rubber feet under the corners.

Frequently asked questions

Which controllers fit?

The stand is designed for the PS5 DualSense and the Xbox Series controller. Other controllers of similar shape and size will probably fit, but it was not designed for them.

Can I charge the controllers while they are on the stand?

Yes. A 12 mm wide cable channel in the middle leaves room for the charging cable.

Does it need supports?

No. Print the stand upright as supplied. The pointed tunnel underneath is self-supporting.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal