Support-free
3MF + STL
Gaming1 part
Handheld Console Stand
Angled stand for a handheld games console or small tablet, for devices up to 22 mm thick at the bottom edge. The centre is open for a right-angle charging cable, which runs to the back through a tunnel under the backrest, so you can play or watch while it charges. Two slots for game cards at the back. Prints without supports.
- Size
- 100 × 92 × 77.5 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Handheld Console Stand holds your handheld games console or small tablet at an angle on your desk, to watch, play with a separate controller or charge. The device sits on two ledges behind a front lip and leans against a backrest at 65 degrees.
- Size 100 × 92 × 78 mm
- For devices up to 22 mm thick at the bottom edge, any width
- Open 30 mm centre and a tunnel under the backrest for a right-angle charging cable
- Two 22.8 × 4.4 mm slots for game cards
- Prints without supports, digitally checked for printability
Print tips: print upright on the base plate, as supplied, with 0.2 mm layers, 3 walls and 20% infill. To charge, use a cable with a right-angle plug. Stick a few anti-slip pads under the base if your desk is smooth.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
handheld-console-stand.3mf
- Dimensions (w × d × h)
- 100 × 92 × 77.5 mm
- File
- 9 kB
You get all files together in one ZIP.
- handheld-console-stand.3mf9 kB
- handheld-console-stand.stl37 kB
388 layers of 0.2 mm (handheld console stand, 77.5 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print upright on the base plate as supplied. To charge while playing, use a cable with a right-angle plug; a straight plug only fits if it is shorter than about 12 mm. Stick a few anti-slip pads under the base if your desk is smooth.
Frequently asked questions
Will my device fit?
Devices up to 22 mm thick at the bottom edge fit, whatever their width. The device rests on two ledges and leans against the backrest.
Can I charge while it is on the stand?
Yes, with a right-angle cable. The centre is open and the cable runs to the back through a tunnel under the backrest.
What are the slots at the back for?
For two small game cards of about 22 × 31 mm, so you keep them close at hand.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
