Support-free
3MF + STL
Gaming2 parts
Card Display Stands (6)
Six small hexagonal stands to display your favourite trading cards upright on a shelf or desk. The slot leans back 15 degrees. Four with a narrow slot for sleeved cards and two with a wider slot for cards in a rigid holder. Prints without supports.
- Largest part
- 52.3 × 46 × 12 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Card Display Stands put your favourite trading cards upright on a shelf, desk or display cabinet. Each stand is a hexagonal foot with a slot that leans back 15 degrees, so the card stands firmly and is easy to see.
- Foot of 52 × 46 mm, 12 mm tall
- Narrow 1.2 mm slot for sleeved cards, including double sleeves
- Wide 2.6 mm slot for cards in a rigid holder
- 9 mm deep slot across the full width, so wider holders fit too
- Prints without supports, digitally checked for printability
Print tips: print flat on the base, as supplied, with 0.2 mm layers, 3 walls and 20% infill. The set is 4 stands for sleeves and 2 for rigid holders, but you can print any mix. Looks great in different colours.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
card-display-stand-sleeve.stl
- Dimensions (w × d × h)
- 52.3 × 46 × 12 mm
- File
- 10 kB
-
card-display-stand-toploader.stl
- Dimensions (w × d × h)
- 52.3 × 46 × 12 mm
- File
- 10 kB
You get all files together in one ZIP.
- card-display-stand-sleeve.stl10 kB
- card-display-stand-toploader.stl10 kB
- card-display-stand.3mf6 kB
60 layers of 0.2 mm (card display stand sleeve, 12 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print flat on the base as supplied: 4 times the sleeve version and 2 times the rigid holder version, or any other mix you prefer. If a card sits too loose or too tight, adjust the slot width at the top of the model (default 1.2 and 2.6 mm).
Frequently asked questions
Do unsleeved cards fit?
Yes, but they sit a little looser in the narrow slot. Sleeved cards hold the firmest.
Which rigid holders fit?
Holders up to about 2.2 mm thick fit the 2.6 mm wide slot. As the slot runs across the full width, the width of the holder does not matter.
Can I display larger cards?
Yes, as long as the card or holder is not thicker than the slot. For large, heavy cards, place the stand against a back wall.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
