Support-free
3MF + STL
Desk3 parts
Cable clip set
Small adhesive clips in three sizes for 3.5, 5 and 7 mm cables. The cable snaps into the ring and stays neatly along the desk edge, the wall or behind your monitor. Stick on with a piece of double-sided tape, prints without supports.
- Largest part
- 26 × 11.6 × 12 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Cable clip set is a set of small adhesive clips that route cables neatly along your desk edge, the wall or the back of your monitor. The cable snaps into a ring and stays there until you pull it out.
- Three sizes, for 3.5, 5 and 7 mm cables
- 26 × 12 mm pad, for a piece of 12 mm double-sided tape
- Each clip is about 1 cm³: dozens fit on the bed at once
- Prints without supports, digitally checked for printability
Print tips: print the clips on their side, as supplied. The ring then flexes along the layers instead of snapping. 0.2 mm layers, 3 walls and 100% infill. PETG snaps in more smoothly than PLA. Print as many clips as you need.
You get three STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
cable-clip-s.stl
- Dimensions (w × d × h)
- 26 × 8.5 × 12 mm
- File
- 35 kB
-
cable-clip-m.stl
- Dimensions (w × d × h)
- 26 × 9.8 × 12 mm
- File
- 38 kB
-
cable-clip-l.stl
- Dimensions (w × d × h)
- 26 × 11.6 × 12 mm
- File
- 38 kB
You get all files together in one ZIP.
- cable-clip-l.stl38 kB
- cable-clip-m.stl38 kB
- cable-clip-s.stl35 kB
- cable-clip-set.3mf28 kB
60 layers of 0.2 mm (cable clip s, 12 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 100%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print on the side as supplied, so the ring flexes along the layers instead of snapping. Print as many clips as you need; dozens fit on the bed at once. PETG snaps in more smoothly than PLA. Mount with a piece of strong 12 mm double-sided tape.
Frequently asked questions
Which cables fit the clips?
Cables 3.5, 5 and 7 mm thick, each in its own clip size. Measure your cable and pick the closest size.
How do I attach the clips?
With a piece of strong 12 mm double-sided tape on the 26 × 12 mm pad. Clean and degrease the surface first.
Why does my clip snap?
Print it on its side as supplied, so the ring flexes along the layers. PETG is tougher than PLA and springs back better.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
