Support-free
3MF + STL
Organizers1 part
USB stick holder
Stepped block for 10 USB-A sticks in two rows. The back row sits higher, so you can see every stick and grab one easily. The sloped strip at the front takes a sticker label or marker, handy for labelling rows.
- Size
- 56 × 44 × 26 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The USB stick holder is a small stepped block for 10 USB-A sticks in two rows. The back row sits higher, so you can see every stick and pull one out easily. The sloped strip at the front takes a sticker label or marker, handy for labelling rows.
- Size: 56 × 44 mm, 16 and 26 mm tall
- 10 slots of 12.7 × 5 mm, 12 mm deep
- For USB-A sticks with a standard metal plug (12 × 4.5 mm)
- Prints without supports, digitally checked for printability
Print tips: print upright, as supplied. 0.2 mm layers, 3 walls, 15% infill, PLA or PETG. If a stick sits too loosely, print with 0.1 mm less clearance.
Looks good next to the SD Card Vault on your desk. You get one STL and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
usb-stick-holder.3mf
- Dimensions (w × d × h)
- 56 × 44 × 26 mm
- File
- 14 kB
You get all files together in one ZIP.
- usb-stick-holder.3mf14 kB
- usb-stick-holder.stl64 kB
130 layers of 0.2 mm (usb stick holder, 26 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print upright as supplied. The slots are sized for USB-A sticks with a standard metal plug (12 x 4.5 mm). If a stick sits too loosely, print with 0.1 mm less clearance.
Frequently asked questions
Which sticks fit?
USB-A sticks with a standard 12 × 4.5 mm metal plug. Sticks with an unusual or very wide body may not fit side by side.
How many sticks does it hold?
Ten, in two rows of five. The back row sits higher.
A stick is too loose. What now?
Reprint the holder with 0.1 mm less clearance, or put a small piece of tape on the plug.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
