Support-free
3MF + STL
Organizers8 parts
Drawer Divider Clips
Clips to divide any drawer yourself with thin boards or sturdy cardboard: cross, T, corner and a wall clip with an adhesive pad. In two sizes, for 3 mm and 5 mm boards. You only print the small clips; you cut the boards to size yourself (not included). Prints upright without supports.
- Largest part
- 27.4 × 30 × 30 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Drawer Divider Clips let you divide any drawer yourself. You only print small clips and slide thin boards or sturdy cardboard into them. No need to print whole bins, and the layout fits your drawer exactly.
- Four shapes: cross, T piece, corner and wall clip with a 30 × 30 mm adhesive pad
- Two sizes: for 3 mm boards (3.4 mm slot) and 5 mm boards (5.4 mm slot)
- Clips 30 mm tall, slots 11 mm deep and open from top to bottom
- Prints without supports, digitally checked for printability
Print tips: print upright. 0.2 mm layers, 3 walls and 30% infill. A starter set is 2 crosses, 4 T pieces, 2 corners and 6 wall clips. Cut the boards about 28 mm high. Boards and double-sided tape are not included.
You get eight STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
drawer-clip-cross-3mm.stl
- Dimensions (w × d × h)
- 37 × 37 × 30 mm
- File
- 50 kB
-
drawer-clip-tee-3mm.stl
- Dimensions (w × d × h)
- 25.8 × 37 × 30 mm
- File
- 39 kB
-
drawer-clip-corner-3mm.stl
- Dimensions (w × d × h)
- 25.8 × 26.8 × 30 mm
- File
- 28 kB
-
drawer-clip-wall-3mm.stl
- Dimensions (w × d × h)
- 27.4 × 30 × 30 mm
- File
- 30 kB
-
drawer-clip-cross-5mm.stl
- Dimensions (w × d × h)
- 37 × 37 × 30 mm
- File
- 48 kB
-
drawer-clip-tee-5mm.stl
- Dimensions (w × d × h)
- 25.8 × 37 × 30 mm
- File
- 42 kB
-
drawer-clip-corner-5mm.stl
- Dimensions (w × d × h)
- 25.8 × 26.8 × 30 mm
- File
- 28 kB
-
drawer-clip-wall-5mm.stl
- Dimensions (w × d × h)
- 27.4 × 30 × 30 mm
- File
- 31 kB
You get all files together in one ZIP.
- drawer-clip-corner-3mm.stl28 kB
- drawer-clip-corner-5mm.stl28 kB
- drawer-clip-cross-3mm.stl50 kB
- drawer-clip-cross-5mm.stl48 kB
- drawer-clip-tee-3mm.stl39 kB
- drawer-clip-tee-5mm.stl42 kB
- drawer-clip-wall-3mm.stl30 kB
- drawer-clip-wall-5mm.stl31 kB
- drawer-divider-clips.3mf71 kB
150 layers of 0.2 mm (drawer clip cross 3mm, 30 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 30%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print upright, as supplied. Choose the size that matches your board: 3 mm for plywood, MDF or sturdy cardboard, 5 mm for foam board or double cardboard. A starter set is 2 crosses, 4 T pieces, 2 corners and 6 wall clips; print more for a bigger drawer. Cut the boards about 28 mm high for a drawer of 30 mm or deeper and stick the wall clips to the side of the drawer with double-sided tape.
Frequently asked questions
Which boards can I use?
Plywood, MDF or sturdy cardboard of 3 mm, or foam board and double cardboard of 5 mm. Pick the clips in the size of your board.
How do I fix the wall clip?
Stick the 30 × 30 mm pad to the side of the drawer with a piece of double-sided tape.
How many clips do I need?
For a regular drawer, 2 crosses, 4 T pieces, 2 corners and 6 wall clips is a good start. Print more if you want more compartments.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
