Nederlands English
Cart 0
Toothpick Dispenser

Support-free

3MF + STL

  • Show image 1: Toothpick Dispenser

Kitchen3 parts

Toothpick Dispenser

Hexagonal toothpick pot with a slider: push the tab at the front up and a single toothpick comes up through the lid. For regular round toothpicks of 65 mm. Three parts (pot, lid and slider), prints without supports.

Largest part
96 × 40 × 61.7 mm
Layer
0.2 mm
Material
PLA or PETG

€1.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Toothpick Dispenser is a hexagonal pot with a clever slider. Push the tab at the front up: the slider moves through the pile and carries exactly one toothpick up through the slot in the lid. Let go and the slider drops back by itself.

  • Pot 96 × 40 mm, 64 mm tall with lid
  • For round toothpicks 65 mm long and up to 2.2 mm thick
  • Funnel with 50 degree walls, so the toothpicks roll towards the slider
  • Three parts: pot, lid and slider
  • Prints without supports, digitally checked for printability

Print tips: print the pot and the slider upright and the lid with the flat side on the bed. 0.2 mm layers, 3 walls and 20% infill. Slide the slider into the pot from below, with the tab through the window. The slider sits loose: lift the pot with your hand underneath.

You get three STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 96 mm 61.7 mm

    toothpick-pot.stl

    Dimensions (w × d × h)
    96 × 40 × 61.7 mm
    File
    9 kB
    Supports: None
  • 96 mm 7.4 mm

    toothpick-lid.stl

    Dimensions (w × d × h)
    96 × 40 × 7.4 mm
    File
    6 kB
    Supports: None
  • 60 mm 35.3 mm

    toothpick-slider.stl

    Dimensions (w × d × h)
    60 × 37 × 35.3 mm
    File
    28 kB
    Supports: None

You get all files together in one ZIP.

  • toothpick-dispenser.3mf11 kB
  • toothpick-lid.stl6 kB
  • toothpick-pot.stl9 kB
  • toothpick-slider.stl28 kB

309 layers of 0.2 mm (toothpick pot, 61.7 mm tall)

Layer height
0.2 mm
Walls
3
Infill
20%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print the pot and the slider upright and the lid with the flat side on the bed, as supplied. Slide the slider into the pot from below, with the tab through the window at the front. Fill the pot with toothpicks lying lengthwise and press the lid on. The slider sits loose and rests on the table: lift the pot with your hand underneath. If the slider feels stiff, sand its sides smooth.

Frequently asked questions

Which toothpicks fit?

Regular round toothpicks 65 mm long and up to 2.2 mm thick. Flat toothpicks do not sit well in the groove.

How does the slider work?

Its top edge has a groove that holds exactly one toothpick. When you push the tab up, the slider carries that toothpick to the top.

How do I fill the pot?

Take off the lid and lay the toothpicks lengthwise in the pot. Press the lid back on.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal