Support-free
3MF + STL
Kitchen1 part
Sink Sponge Holder
Stand your kitchen sponge upright in this open caddy next to the sink. Slots in the floor and diamond windows in the walls let water drain and air in, so the sponge dries faster instead of sitting in a puddle. Fits a regular sponge of about 70 x 100 x 30 mm. Support-free.
- Size
- 108 × 38 × 36 mm
- Layer
- 0.2 mm
- Material
- PETG (aanbevolen bij water en afwasmiddel) or PLA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Sink Sponge Holder stands your kitchen sponge upright next to the sink. Slots in the floor and diamond windows in the walls let water drain and air in, so the sponge dries faster instead of sitting in a puddle.
- Size: 108 × 38 × 36 mm, inside 104 × 34 mm
- For a regular sponge of about 70 × 100 × 30 mm
- Drain slots in the floor, windows in the walls
- Prints without supports, digitally checked for printability
Print tips: print floor-down, as supplied. 0.2 mm layers, 3 walls, 15% infill. PETG is recommended with water and dish soap; PLA can warp with hot water.
Place the holder where water can drain towards the sink, such as on the drying rack or the edge of the sink. You get one STL and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
holder.stl
- Dimensions (w × d × h)
- 108 × 38 × 36 mm
- File
- 145 kB
You get all files together in one ZIP.
- holder.stl145 kB
- sink-sponge-holder.3mf30 kB
180 layers of 0.2 mm (holder, 36 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PETG (aanbevolen bij water en afwasmiddel) or PLA
Designer's tip
Print floor-down, as oriented in the file. PETG recommended: PLA can warp with hot water. Place the holder where water can drain towards the sink, for example on the drying rack or the edge of the sink.
Frequently asked questions
Will my sponge fit?
The inside is 104 × 34 mm, for a regular kitchen sponge of about 70 × 100 × 30 mm standing upright.
PLA or PETG?
PETG. It handles hot water and dish soap better. PLA can warp if hot water reaches it regularly.
Where do I put it?
Somewhere water can drain to the sink, such as the drying rack or the edge of the sink.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
