Nederlands English
Cart 0
Hex Succulent Pot Trio

Support-free

3MF + STL

  • Show image 1: Hex Succulent Pot Trio

Planters4 parts

Hex Succulent Pot Trio

Three hexagonal mini pots of 50, 65 and 80 mm for succulents and cacti. They sit together like a piece of honeycomb in one shared tray. Each pot has a drainage hole and rests on small ribs in the tray, so excess water can drain away. Prints without supports, looks great in three colours.

Largest part
91.6 × 80 × 62 mm
Layer
0.2 mm
Material
PETG or PLA

€1.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Hex Succulent Pot Trio is a set of three hexagonal mini pots for succulents and cacti. They sit together in one shared tray, like a piece of honeycomb. Print them in three colours for an instant cheerful windowsill group.

  • Pots of 50, 65 and 80 mm across the flats, 46, 54 and 62 mm tall
  • 7 mm drainage hole in every pot
  • 155 × 139 × 8 mm tray with small ribs, so water can drain away under the pots
  • Prints without supports, digitally checked for printability

Print tips: print each pot and the tray once, upright as supplied. 0.2 mm layers, 3 walls and 15% infill. PETG copes better with water and sunlight than PLA. Put a piece of mesh or a pebble over the hole, fill with cactus soil and water sparingly.

You get four STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 56.9 mm 46 mm

    succulent-pot-s.stl

    Dimensions (w × d × h)
    56.9 × 50 × 46 mm
    File
    33 kB
    Supports: None
  • 74.2 mm 54 mm

    succulent-pot-m.stl

    Dimensions (w × d × h)
    74.2 × 65 × 54 mm
    File
    33 kB
    Supports: None
  • 91.6 mm 62 mm

    succulent-pot-l.stl

    Dimensions (w × d × h)
    91.6 × 80 × 62 mm
    File
    33 kB
    Supports: None
  • 154.5 mm 8 mm

    succulent-pot-tray.stl

    Dimensions (w × d × h)
    154.5 × 139.2 × 8 mm
    File
    83 kB
    Supports: None

You get all files together in one ZIP.

  • succulent-pot-l.stl33 kB
  • succulent-pot-m.stl33 kB
  • succulent-pot-s.stl33 kB
  • succulent-pot-tray.stl83 kB
  • succulent-pot-trio.3mf45 kB

310 layers of 0.2 mm (succulent pot l, 62 mm tall)

Layer height
0.2 mm
Walls
3
Infill
15%
Supports
Not needed
Material
PETG or PLA

Designer's tip

Print each pot and the tray once, upright as supplied. PETG copes better with water and sunlight than PLA. Put a small piece of mesh or a pebble over the drainage hole, fill with cactus soil and water sparingly.

Frequently asked questions

Does water leak out of the tray?

No, the tray is closed. Excess water runs through the hole in the pot into the tray, where it stays below the pot.

Which plants fit?

Small succulents, cacti and cuttings. The largest pot is 80 mm wide and 62 mm tall.

Can I use one pot on its own?

Yes, each pot also works on its own on a saucer or in another tray.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal