Support-free
3MF + STL
Organizers1 part
Honeycomb Remote Caddy
Four hexagonal compartments in a row for remote controls up to 54 mm wide and 26 mm thick. The top edge slopes up towards the back so you see everything at a glance. Put it on the sofa or side table, or hang it on the wall with two 4 mm screws (not included). Prints without supports.
- Size
- 61.1 × 123 × 116 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Honeycomb Remote Caddy gives every remote control its own slot. The four elongated hexagonal compartments sit in a row and the top edge slopes up towards the back. You see everything at once and the front remote is easy to grab.
- Size: 61 x 123 x 116 mm
- 4 slots of 56 x 28 mm, for remotes up to about 54 mm wide and 26 mm thick
- Front 52 mm tall, back 100 mm
- Tab with two countersunk holes for 4 mm screws, 22 mm apart
- Prints without supports, digitally checked for printability
Print tips: print the caddy upright, as supplied. The holes in the tab are teardrop shaped, so they print without supports. 0.2 mm layers, 3 walls, 15% infill, PLA or PETG. When you hang it, a screwdriver reaches the screws over the lower compartments. Screws are not included.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
remote-control-caddy.3mf
- Dimensions (w × d × h)
- 61.1 × 123 × 116 mm
- File
- 9 kB
You get all files together in one ZIP.
- remote-control-caddy.3mf9 kB
- remote-control-caddy.stl35 kB
580 layers of 0.2 mm (remote control caddy, 116 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print upright as supplied. The holes in the tab are teardrop shaped, so they print without supports. To hang it, drive two 4 mm countersunk screws (not included) through the tab; a screwdriver reaches them over the lower compartments. On the sofa, stick a few anti-slip bumpers under the base.
Frequently asked questions
Will my remote controls fit?
Each slot is 56 mm wide and 28 mm deep. Remotes up to about 54 mm wide and 26 mm thick fit. Measure the widest point.
Can I hang it on the wall?
Yes, the tab on the back has two countersunk holes for 4 mm screws. On the sofa or table you simply stand it up.
Why are the screw holes teardrop shaped?
A round hole in an upright wall has a flat ceiling that sags without supports. The teardrop shape has a pointed roof and prints cleanly.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
