Support-free
3MF + STL
Organizers1 part
Marker Pen Rack
Stepped honeycomb rack for 24 markers in four rows, so you can see every colour. Hexagonal 13.4 mm holes for markers up to about 13 mm thick. A dovetail lets you slide two racks together for 48 markers, or more. Prints upright without supports.
- Size
- 115.4 × 62.4 × 62 mm
- Layer
- 0.2 mm
- Material
- PLA
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Marker Pen Rack is a honeycomb block with four rows of hexagonal holes that get higher towards the back. That way you see the cap and colour of every marker, even at the back. A dovetail in the base links two or more racks together.
- 24 markers per rack in 4 rows of 6
- 13.4 mm hexagonal holes, for markers up to about 13 mm thick
- Rows 26, 38, 50 and 62 mm tall
- Rack about 115 × 62 × 62 mm
- Prints without supports, digitally checked for printability
Print tips: print upright. 0.2 mm layers, 2 walls and 15% infill. For 48 markers print the rack twice and slide them together from the top using the dovetail. Thin markers lean a little; that is normal.
You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
marker-pen-rack.3mf
- Dimensions (w × d × h)
- 115.4 × 62.4 × 62 mm
- File
- 26 kB
You get all files together in one ZIP.
- marker-pen-rack.3mf26 kB
- marker-pen-rack.stl124 kB
310 layers of 0.2 mm (marker pen rack, 62 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 2
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA
Designer's tip
Print upright, as supplied. For 48 markers print the rack twice and slide them together from the top using the dovetail. Thin markers lean a little in the holes; that is normal.
Frequently asked questions
Which markers fit?
Markers up to about 13 mm thick, such as regular felt-tip pens and markers. Thin pens lean slightly in the hole.
How do I make the rack bigger?
Print the rack again and slide the racks together from the top with the dovetail in the base. That gives you 48, 72 or more spots.
How big is one rack?
About 115 mm wide, 62 mm deep and 62 mm tall at the back.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
