Support-free
3MF + STL
Kitchen2 parts
Wall Kitchen Roll Holder
Two hexagonal wall brackets for a kitchen roll up to 280 mm wide. Between them you place a round wooden dowel or piece of broom handle, 20 to 24 mm thick, cut to 350 mm (not included). That way everything prints within 180 mm. Mount with 4 screws of 4 mm with countersunk heads (not included). Prints without supports.
- Largest part
- 44 × 129.4 × 96.4 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Wall Kitchen Roll Holder consists of two hexagonal wall brackets. Between them you place a round wooden dowel or a piece of broom handle. That way a wide kitchen roll fits while everything still prints within 180 mm.
- For kitchen rolls up to 280 mm wide and 130 mm thick
- Dowel 20 to 24 mm thick, cut to 350 mm
- Brackets 335 mm apart (centre to centre), dowel 75 mm from the wall
- 44 × 130 mm wall plate with 2 countersunk holes per bracket
- Prints without supports, digitally checked for printability
Print tips: print both brackets on their back. 0.2 mm layers, 4 walls and 25% infill. The cradle opens upwards at an angle, so you lift the dowel out with the roll. The dowel and 4 screws of 4 mm with countersunk heads are not included.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
kitchen-roll-bracket-left.stl
- Dimensions (w × d × h)
- 44 × 129.4 × 96.4 mm
- File
- 73 kB
-
kitchen-roll-bracket-right.stl
- Dimensions (w × d × h)
- 44 × 129.4 × 96.4 mm
- File
- 73 kB
You get all files together in one ZIP.
- kitchen-roll-bracket-left.stl73 kB
- kitchen-roll-bracket-right.stl73 kB
- kitchen-roll-holder.3mf34 kB
482 layers of 0.2 mm (kitchen roll bracket left, 96.4 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 25%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print both brackets (left and right) on their back, as supplied. Not included: a round dowel 20 to 24 mm thick, cut to 350 mm, and 4 screws of 4 mm with countersunk heads plus wall plugs. Screw the brackets level next to each other with 325 mm between the bracket centres, open cradles facing up. Lay the dowel with the roll on it in the cradles; the end walls keep it in place.
Frequently asked questions
Which dowel do I need?
A round wooden dowel or a piece of broom handle 20 to 24 mm thick, cut to 350 mm. It is not included.
How far apart should the brackets be?
335 mm between the centres of the brackets. Mount them level with the open cradles facing up.
How do I change the roll?
Lift the dowel up and out of the cradles at an angle, slide the new roll on and put the dowel back.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
