Support-free
3MF + STL
Planters2 parts
Hex Houseplant Trellis
Flat 17 cm honeycomb trellis for climbing houseplants such as hoya, ivy and passion flower. Two stakes let you push it straight into the pot. Includes small clips that snap over a bar and hold the stem loosely in an open hexagonal eye. Prints without supports.
- Largest part
- 103.9 × 167.7 × 4 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€1.99incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Hex Houseplant Trellis is a flat honeycomb trellis for climbers such as hoya, ivy and passion flower. Its two stakes let you push it straight into the pot. The included clips snap over a bar and hold the stem loosely in an open hexagonal eye, so it is not pinched.
- Trellis 104 × 168 × 4 mm, including 50 mm stakes
- 20 mm honeycomb cells with 3 mm bars
- Clip with a 14 mm eye and a 5 mm opening
- Prints without supports, digitally checked for printability
Print tips: print everything flat, as supplied, with 0.2 mm layers and 3 walls. Print the trellis once and the clip as often as you like; 6 is a good start. PETG is more flexible and copes better with damp potting soil than PLA.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
houseplant-trellis.stl
- Dimensions (w × d × h)
- 103.9 × 167.7 × 4 mm
- File
- 161 kB
-
houseplant-trellis-clip.stl
- Dimensions (w × d × h)
- 20.8 × 24.6 × 6 mm
- File
- 26 kB
You get all files together in one ZIP.
- houseplant-trellis-clip.stl26 kB
- houseplant-trellis-hex.3mf41 kB
- houseplant-trellis.stl161 kB
30 layers of 0.2 mm (houseplant trellis clip, 6 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 100%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Print flat as supplied. Print the trellis once and the clip as often as you like (6 is a good start). Push the clip's U-slot over a bar and slip the stem through the opening into the eye. PETG is more flexible and copes better with damp potting soil than PLA.
Frequently asked questions
Which pot size does it suit?
The trellis is 104 mm wide and its stakes go 50 mm into the soil. It suits pots from about 10 cm across.
How do I attach the stem?
Snap the clip's U-slot over a bar and slip the stem through the opening into the hexagonal eye. It stays in place without being squeezed.
Can I combine several trellises?
Yes, place two side by side in a wider pot for a larger climbing wall.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
