Nederlands English
Cart 0
Hex Wall Planter

Support-free

3MF + STL

  • Show image 1: Hex Wall Planter

Planters2 parts

Hex Wall Planter

Half-hexagon plant pot that hangs flat against the wall, about 140 mm wide and 100 mm tall. The inner pot with drainage holes stands on ribs inside a closed outer pot: water stays at the bottom and does not run down the wall. Hangs on two keyholes with 4 mm screws (not included). Several pots together form a honeycomb. Prints without supports.

Largest part
138.7 × 60.6 × 100 mm
Layer
0.2 mm
Material
PETG or PLA

€2.99incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Hex Wall Planter is a half-hexagon pot that hangs flat against the wall. It has two parts: a closed outer pot that hangs on the wall and an inner pot with drainage holes. The inner pot stands on ribs, 12 mm above the bottom. Excess water stays at the bottom and does not run down the wall.

  • Size: 139 x 61 x 100 mm
  • Inner pot 123 x 49 x 86 mm
  • Two keyholes, 70 mm apart, for 4 mm screws with a head up to 9 mm
  • Several pots hung in a staggered layout form a honeycomb pattern
  • Prints without supports, digitally checked for printability

Print tips: print both parts upright, as supplied. For a watertight outer pot use 3 walls, 4 bottom layers and preferably PETG. Leave the screw heads sticking out 4 mm from the wall, hang the pot over them and let it drop. Screws are not included. Water sparingly the first few times.

You get two STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 138.7 mm 100 mm

    hex-wall-planter-shell.stl

    Dimensions (w × d × h)
    138.7 × 60.6 × 100 mm
    File
    27 kB
    Supports: None
  • 122.9 mm 85.6 mm

    hex-wall-planter-pot.stl

    Dimensions (w × d × h)
    122.9 × 49 × 85.6 mm
    File
    61 kB
    Supports: None

You get all files together in one ZIP.

  • hex-wall-planter-pot.stl61 kB
  • hex-wall-planter-shell.stl27 kB
  • hex-wall-planter.3mf18 kB

500 layers of 0.2 mm (hex wall planter shell, 100 mm tall)

Layer height
0.2 mm
Walls
3
Infill
15%
Supports
Not needed
Material
PETG or PLA

Designer's tip

Print the outer pot and the inner pot upright as supplied. For a watertight outer pot use 3 walls, 4 bottom layers and preferably PETG. Drive two 4 mm screws (not included) 70 mm apart into the wall, leave the heads sticking out 4 mm, hang the pot over the heads and let it drop. Water sparingly and check for standing water at the bottom the first few times.

Frequently asked questions

Will water run down the wall?

The outer pot is closed at the bottom and catches the water. Print it with 3 walls and 4 bottom layers, preferably in PETG, and do not give more water than the 12 mm reservoir can hold.

How do I hang it?

Drive two 4 mm screws 70 mm apart into the wall and leave the heads sticking out 4 mm. Hang the pot over the heads with the keyholes and let it drop.

Which plants fit?

Small houseplants, succulents and herbs. The inner pot is 86 mm tall and about 49 mm deep.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal