Support-free
3MF + STL
Kitchen1 part
Hex Napkin Rings (6)
Hexagonal napkin rings with a recessed honeycomb motif on every side and a smooth inside. They match the hex coasters and place card holders, for a holiday table in one style. Small, quick to print and support free.
- Size
- 52.9 × 47.2 × 26 mm
- Layer
- 0.2 mm
- Material
- PLA or PETG
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Hex Napkin Rings turn a rolled napkin into a festive table setting. Every flat side has a recessed flower of seven honeycomb cells, the same motif as the hex coasters. Inside, the ring is round and smooth, with a small chamfer at the top so the napkin slides in easily.
- Ring: 52.9 × 47.2 mm, 26 mm tall
- Inner diameter 42 mm, for a rolled cloth or paper napkin
- Wall at least 1.8 mm, also at the motif
- Six rings from one STL
- Prints without supports, digitally checked for printability
Print tips: print the ring 6 times upright as supplied, 0.2 mm layers, 3 walls, 15% infill. The top of each cell is a short bridge; good part cooling gives the neatest edges. Silk or gold filament looks extra festive.
Matches the Place Card Holders and the hex coasters. You get one STL file and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
hex-napkin-ring.stl
- Dimensions (w × d × h)
- 52.9 × 47.2 × 26 mm
- File
- 126 kB
You get all files together in one ZIP.
- hex-napkin-ring.stl126 kB
- hex-napkin-rings.3mf31 kB
130 layers of 0.2 mm (hex napkin ring, 26 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- Not needed
- Material
- PLA or PETG
Designer's tip
Print the ring 6 times, upright as supplied. The top of each honeycomb cell is a short bridge; good part cooling gives the neatest edges. Silk or gold filament looks extra festive. For a stripe in a second colour, change colour at 13 mm height.
Frequently asked questions
Which napkins fit?
The ring is 42 mm wide inside, meant for a rolled or folded cloth or paper napkin. A very thick linen napkin may be a tight fit.
Are the napkin rings dishwasher safe?
Better not. PLA can warp from the heat; PETG handles it better. A damp cloth is enough to clean them.
Can I print them in different colours?
Yes. Print each ring in its own colour so everyone recognises their napkin, or change colour at 13 mm height for a two-colour ring.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
