Nederlands English
Cart 0
Fridge Door Dividers

Support-free

3MF + STL

  • Show image 1: Fridge Door Dividers

Kitchen3 parts

Fridge Door Dividers

Clips with a divider that snap onto the front edge of your fridge door shelf. They split the shelf into compartments so bottles, cartons and jars stay upright. In three sizes, for an edge 2.5, 3.5 or 4.5 mm thick. Prints on its side without supports.

Largest part
82.4 × 75 × 20 mm
Layer
0.2 mm
Material
PETG or PLA

€1.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Fridge Door Dividers snap onto the front edge of the door shelf. The divider with honeycomb windows splits the shelf into compartments, so bottles, cartons and jars stay upright and no longer tip over when you close the door.

  • Three sizes for an edge 2.5, 3.5 or 4.5 mm thick
  • 20 mm wide clip with a snap bump
  • Divider 80 mm deep, 40 mm below and 35 mm above the edge, 3 mm thick
  • The shelf edge must be at least 45 mm high
  • Prints without supports, digitally checked for printability

Print tips: first measure the thickness of the front edge and pick size s, m or l. Print on its side. 0.2 mm layers, 3 walls and 30% infill. PETG clips on more smoothly than PLA and handles the cold better. 4 pieces is a good start.

You get three STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 82.4 mm 20 mm

    fridge-divider-s.stl

    Dimensions (w × d × h)
    82.4 × 75 × 20 mm
    File
    82 kB
    Supports: None
  • 82.4 mm 20 mm

    fridge-divider-m.stl

    Dimensions (w × d × h)
    82.4 × 75 × 20 mm
    File
    82 kB
    Supports: None
  • 82.4 mm 20 mm

    fridge-divider-l.stl

    Dimensions (w × d × h)
    82.4 × 75 × 20 mm
    File
    74 kB
    Supports: None

You get all files together in one ZIP.

  • fridge-divider-l.stl74 kB
  • fridge-divider-m.stl82 kB
  • fridge-divider-s.stl82 kB
  • fridge-door-divider.3mf50 kB

100 layers of 0.2 mm (fridge divider s, 20 mm tall)

Layer height
0.2 mm
Walls
3
Infill
30%
Supports
Not needed
Material
PETG or PLA

Designer's tip

First measure how thick the front edge of your door shelf is and pick size s (2.5 mm), m (3.5 mm) or l (4.5 mm). Print on its side, as supplied; 4 pieces is a good start. The front edge must be at least 45 mm high above the floor of the shelf. PETG clips on more smoothly than PLA and handles the cold better.

Frequently asked questions

Which size do I need?

Measure the thickness of the front edge of your door shelf. Choose s for 2.5 mm, m for 3.5 mm and l for 4.5 mm.

Does it fit every fridge?

It fits door shelves with a straight front edge 2.5 to 4.5 mm thick and at least 45 mm high. Measure your shelf before printing.

Which filament works best?

PETG, because it is a little more flexible and handles the cold better. PLA works too.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal