Support-free
3MF + STL
Desk2 parts
Desk Edge Cup Holder
Clamp for the edge of your desk with a hexagonal holder for a mug or cup up to 90 mm. Your coffee sits next to the desktop instead of next to your keyboard. Slot for the mug handle and a honeycomb floor. Made for a 25 mm desktop by default, adjustable from 15 to 40 mm. Prints without supports.
- Largest part
- 114.5 × 106 × 68 mm
- Layer
- 0.2 mm
- Material
- PETG or PLA
€2.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Desk Edge Cup Holder puts your coffee next to the desktop instead of next to your keyboard. The clamp slides over the edge of the desk and the hexagonal holder hangs with a hook lip over an angled rail. The weight of the mug pulls the holder tighter.
- Holder 114 x 106 mm, 68 mm tall
- 94 mm inside, for mugs and cups up to about 90 mm
- 24 mm slot for the mug handle
- Honeycomb floor, spilled coffee drains away
- 40 mm wide clamp that reaches 42 mm over the desktop
- Made for a 25 mm desktop by default, adjustable from 15 to 40 mm
- Prints without supports, digitally checked for printability
Print tips: measure your desktop first. Print the clamp on its side and the holder upright, as supplied. 0.2 mm layers, 4 walls, 30% infill. For hot coffee PETG is better than PLA.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
desk-cup-holder-clamp.3mf
- Dimensions (w × d × h)
- 52 × 35 × 40 mm
- File
- 24 kB
-
desk-cup-holder-cup.stl
- Dimensions (w × d × h)
- 114.5 × 106 × 68 mm
- File
- 121 kB
You get all files together in one ZIP.
- desk-cup-holder-clamp.3mf24 kB
- desk-cup-holder-clamp.stl6 kB
- desk-cup-holder-cup.stl121 kB
340 layers of 0.2 mm (desk cup holder cup, 68 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 4
- Infill
- 30%
- Supports
- Not needed
- Material
- PETG or PLA
Designer's tip
Measure your desktop first and set DESK_T to that thickness. Print the clamp on its side and the holder upright, as supplied. Slide the clamp over the edge and hang the holder with its lip over the angled rail. For hot coffee PETG is better than PLA. Mount it where your knee will not bump into it.
Frequently asked questions
Will the clamp fit my desk?
By default it fits a 25 mm desktop. For a desktop of 15 to 40 mm set DESK_T to the right thickness and print the clamp again.
Which mugs fit?
Mugs and cups up to about 90 mm in diameter. The handle goes into the 24 mm slot at the front.
Can the holder fall off?
The holder hangs with a lip over an angled rail, like a French cleat. The heavier the mug, the tighter it pulls against the clamp. Lift it to take it off.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
