Nederlands English
Cart 0
Cable winders

Support-free

3MF + STL

  • Show image 1: Cable winders

Desk3 parts

Cable winders

Three flat cable winders for your bag or drawer: small for earbuds, medium for a phone charger and large for a laptop or extension cable. Wrap the cable around the waist and clip both ends into the slots, so everything stays neatly coiled.

Largest part
81.8 × 34 × 3.2 mm
Layer
0.2 mm
Material
PLA or PETG

€1.49incl. VAT

  • 3MF
  • STL
  • Digitally checked for printability
  • Prints without supports
  • Download right after payment
  • 3MF + STL in one ZIP
Also in the Tidy Desk bundle save €4.96 View the bundle

Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.

Colours in the photo

About this design

The Cable winders keep cables in your bag or drawer neatly coiled. Wrap the cable around the waist of the winder and clip both ends into the slots. No more tangles.

  • Small: 52 × 22 mm, for earbuds (cable approx. 2.5 mm)
  • Medium: 66 × 28 mm, for a phone charger (approx. 3.5 mm)
  • Large: 82 × 34 mm, for a laptop or extension cable (approx. 5 mm)
  • All three 3.2 mm thick, no supports, digitally checked for printability

Print tips: print flat, as supplied; a winder takes just a few minutes. 0.2 mm layers, 3 walls, 50% infill. The clip slot is slightly narrower than the cable, so it stays in place. PETG gives a springier slot than PLA.

Print them in different colours so you can tell cables apart at a glance. You get three STL files and one 3MF.

Parts and dimensions

Dimensions w × d × h, each part checked separately.

  • 51.9 mm 3.2 mm

    cable-winder-s.stl

    Dimensions (w × d × h)
    51.9 × 22 × 3.2 mm
    File
    117 kB
    Supports: None
  • 65.9 mm 3.2 mm

    cable-winder-m.stl

    Dimensions (w × d × h)
    65.9 × 28 × 3.2 mm
    File
    118 kB
    Supports: None
  • 81.8 mm 3.2 mm

    cable-winder-l.stl

    Dimensions (w × d × h)
    81.8 × 34 × 3.2 mm
    File
    123 kB
    Supports: None

You get all files together in one ZIP.

  • cable-winder-l.stl123 kB
  • cable-winder-m.stl118 kB
  • cable-winder-s.stl117 kB
  • cable-winder-set.3mf88 kB

16 layers of 0.2 mm (cable winder s, 3.2 mm tall)

Layer height
0.2 mm
Walls
3
Infill
50%
Supports
Not needed
Material
PLA or PETG

Designer's tip

Print flat as supplied; a winder takes just a few minutes. The clip slot is slightly narrower than the cable, so it stays in place. PETG gives a springier slot than PLA.

Frequently asked questions

Which size for which cable?

Small for earbuds (cable approx. 2.5 mm), medium for a phone charger (approx. 3.5 mm) and large for a laptop or extension cable (approx. 5 mm).

Does the cable stay put?

The clip slot is slightly narrower than the cable, so the end is held. PETG springs back better than PLA and lasts longer.

How long does it take to print?

A winder is flat and 3.2 mm thick, so it prints in a few minutes on most printers.

License at a glance

You may

  • Print for yourself, your family and as a gift
  • Sell printed copies in small quantities

You may not

  • Resell or share the files
  • Upload the files to other platforms

Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal